NSN RW79U2001F

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

0.560 inches nominal body length, 25.0 celsius ambient temp at full rated power, 0.187 inches nominal body diameter, 0.015 cubic inches cubic measure, 275.0 ambient temp in deg celsius at zero percent rated power.

NSN 5905-00-989-9217 Datasheet

(NSN) National Stock Number

5905-00-989-9217

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5905 - Resistor

(NIIN) National Item Identification Number

00-989-9217

Requires Demilitarization

Yes

(INC) Item Name Code

37403

Date

Tue, Nov 8, 1966

Schedule B Code

8533390080

Ambient Temp At Full Rated Power

25.0 celsius

Ambient Temp In Deg Celsius At Zero Percent Rated Power

275.0

Body Diameter

0.187 inches nominal

Body Length

0.560 inches nominal

Cubic Measure

0.015 cubic inches

Electrical Resistance

2.000 kilohms

Inclosure Type

encapsulated

Power Dissipation Rating In Watts

3.000 free air

Reliability Indicator

not established

Resistance Tolerance In Percent

-1.000 to 1.000

Specification/Standard Data

81349-mil-r-26/5 government specification

Style Designator

axial terminal each end

Temp Coefficient Of Resistance In Ppm Per Deg Celsius

-30.0 to 30.0

Temp Range Of Temp Coefficient In Deg Celsius

-55.0 to 275.0

Terminal Length

1.500 inches minimum

Terminal Type

wire lead

Test Data Document

"81349-mil-r-26 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Unpackaged Unit Weight

0.7 grams

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0037403

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35140

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

062960

Schedule B & Trade

Schedule B

8533-39-0080

Description

wirewound variable resistors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77233

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5905-00-989-9217?

   The FSCG of the NSN 5905-00-989-9217 is 5905

2. Does the NSN 5905-00-989-9217 have a Schedule B code assigned?

   Yes, the Schedule B code is 8533390080

3. Does NSN 5905-00-989-9217 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5905-00-989-9217 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5905-00-989-9217 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5905-00-989-9217 was assigned to the Federal Catalog?

   It was assigned 59 years ago, on Tue, Nov 8, 1966