NSN RWR84S2211FP

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

0.875 inches nominal body length, 25.0 celsius ambient temp at full rated power, 0.063 cubic inches cubic measure, 275.0 ambient temp in deg celsius at zero percent rated power, 0.312 inches nominal body diameter.

NSN 5905-01-044-2149 Datasheet

(NSN) National Stock Number

5905-01-044-2149

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5905 - Resistor

(NIIN) National Item Identification Number

01-044-2149

Requires Demilitarization

Yes

(INC) Item Name Code

37403

Date

Sat, Jul 9, 1977

Schedule B Code

8533390080

Ambient Temp At Full Rated Power

25.0 celsius

Ambient Temp In Deg Celsius At Zero Percent Rated Power

275.0

Body Diameter

0.312 inches nominal

Body Length

0.875 inches nominal

Cubic Measure

0.063 cubic inches

Electrical Resistance

2.210 kilohms

Inclosure Type

encapsulated

Power Dissipation Rating In Watts

7.000 free air

Reliability Failure Rate Level In Percent

0.001

Reliability Indicator

established

Resistance Tolerance In Percent

-1.000 to 1.000

Specification/Standard Data

81349-mil-r-39007/10 government specification

Style Designator

axial terminal each end

Temp Coefficient Of Resistance In Ppm Per Deg Celsius

-20.0 to 20.0

Temp Range Of Temp Coefficient In Deg Celsius

-55.0 to 275.0

Terminal Length

1.500 inches minimum

Terminal Type

wire lead

Test Data Document

"81349-mil-r-39007 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Unpackaged Unit Weight

5.000 grams

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0037403

Cross Reference

CAGE Codes

44655

Ohmite Holding, L.l.c. Dba Ohmite Manufacturing

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35140

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

062960

Schedule B & Trade

Schedule B

8533-39-0080

Description

wirewound variable resistors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77233

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5905-01-044-2149?

   The FSCG of the NSN 5905-01-044-2149 is 5905

2. Does the NSN 5905-01-044-2149 have a Schedule B code assigned?

   Yes, the Schedule B code is 8533390080

3. Does NSN 5905-01-044-2149 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5905-01-044-2149 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5905-01-044-2149 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5905-01-044-2149 was assigned to the Federal Catalog?

   It was assigned 49 years ago, on Sat, Jul 9, 1977