NSN S142C

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

70.0 millimeters nominal overall width, integrating sphere photodiode power sensor part name assigned by controlling agency, 70.0 millimeters nominal overall height, 70.0 millimeters nominal overall length, threaded hole(s) mounting method.

NSN 6625-01-617-8574 Datasheet

(NSN) National Stock Number

6625-01-617-8574

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6625 - Electrical and Electronic Properties Measuring and Testing Instruments

(NIIN) National Item Identification Number

01-617-8574

Requires Demilitarization

Yes

(INC) Item Name Code

49601

Date

Fri, Apr 5, 2013

Schedule B Code

9030908030

Part Name Assigned By Controlling Agency

integrating sphere photodiode power sensor

Mounting Method

threaded hole(s)

Overall Height

70.0 millimeters nominal

Overall Length

70.0 millimeters nominal

Overall Width

70.0 millimeters nominal

Special Features

si, 350 - 1100 nm, 5 w

Terminal Type And Quantity

1 quick disconnect, female

Voltage Rating And Type Per Characteristic

500.0 millivolts maximum operating

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0049601

Cross Reference

CAGE Codes

0LW43

Thorlabs, Inc

U.s./canadian manufacturers

Freight Information

Schedule B & Trade

Schedule B

9030-90-8030

Description

parts and accessories of articles of schedule b subheading 9030.39

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

87479

(NAICS) North American Industrial Classification System

334515

Questions & Answers

1. What is the FSCG of the NSN 6625-01-617-8574?

   The FSCG of the NSN 6625-01-617-8574 is 6625

2. Does the NSN 6625-01-617-8574 have a Schedule B code assigned?

   Yes, the Schedule B code is 9030908030

3. Does NSN 6625-01-617-8574 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6625-01-617-8574 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6625-01-617-8574 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6625-01-617-8574 was assigned to the Federal Catalog?

   It was assigned 13 years ago, on Fri, Apr 5, 2013