NSN S32-2

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

unable to decode contact load current rating, unable to decode contact voltage rating in volts, unable to decode color, unable to decode contact arrangement truth table, unable to decode actuator type.

NSN 5930-01-146-1819 Datasheet

(NSN) National Stock Number

5930-01-146-1819

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-146-1819

Requires Demilitarization

Yes

(INC) Item Name Code

62415

Date

Wed, Jan 26, 1983

Schedule B Code

8536509065

Actuator Type

unable to decode

Color

unable to decode

Contact Arrangement Truth Table

unable to decode

Contact Load Current Rating

unable to decode

Contact Voltage Rating In Volts

unable to decode

Individual Section Quantity

2

Longest Horizontal Distance Between Mounting Centers

unable to decode

Longest Vertical Distance Between Mounting Centers

unable to decode

Mounting Facility Pattern

unable to decode

Mounting Method

Overall Height

2.188 inches nominal

Overall Length

2.000 inches nominal

Overall Width

2.180 inches maximum

Precious Material And Location

rotor and stator surfaces gold

Precious Material

gold

Readout Indicator Marking

unable to decode

Style Designator

rectangular inline indicating

Switch Actuator Indexing Position Quantity

unable to decode

Terminal Type

printed circuit

Unthreaded Mounting Hole Diameter

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0062415

Cross Reference

CAGE Codes

1PQF4

Cae Usa Inc.

U.s./canadian manufacturers

36378

Raytheon Technical Services Company

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9065

Description

switches, for a voltage not exceeding 1000 volts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-146-1819?

   The FSCG of the NSN 5930-01-146-1819 is 5930

2. Does the NSN 5930-01-146-1819 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509065

3. Does NSN 5930-01-146-1819 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-146-1819 contain precious materials?

   Item contains gold.

5. Does NSN 5930-01-146-1819 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-146-1819 was assigned to the Federal Catalog?

   It was assigned 43 years ago, on Wed, Jan 26, 1983