NSN S656SS17

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

0.204 inches nominal diameter, 1.006 inches minimum and 1.036 inches maximum center to center distance between loop and mounting hole, 1.240 inches nominal distance from loop center to tongue end, material document and classification, 1.062 inches nominal loop inside diameter.

NSN 5340-01-365-6003 Datasheet

(NSN) National Stock Number

5340-01-365-6003

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-365-6003

Requires Demilitarization

Yes

(INC) Item Name Code

17532

Date

Fri, Oct 9, 1992

Center To Center Distance Between Loop And Mounting Hole

1.006 inches minimum and 1.036 inches maximum

Diameter

0.204 inches nominal

Distance From Loop Center To Tongue End

1.240 inches nominal

Loop Inside Diameter

1.062 inches nominal

Material Document And Classification

Material

Material Thickness

0.051 inches nominal

Overall Width

0.500 inches nominal

Style Designator

single loop

Surface Treatment Document And Classification

unable to decode

Surface Treatment

unable to decode

Tongue Hole Type

round, unthreaded

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0017532

Cross Reference

CAGE Codes

83930

Transdigm Inc Dba Adel Wiggins Group Div Adel Wiggins

U.s./canadian manufacturers

76301

The Boeing Company Div Defense

U.s./canadian manufacturers

22175

J & M Products, Inc

U.s./canadian manufacturers

18076

Umpco, Inc. Dba Umpco Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

00000

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

094100

Questions & Answers

1. What is the FSCG of the NSN 5340-01-365-6003?

   The FSCG of the NSN 5340-01-365-6003 is 5340

2. Does NSN 5340-01-365-6003 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-01-365-6003 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5340-01-365-6003 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-01-365-6003 was assigned to the Federal Catalog?

   It was assigned 34 years ago, on Fri, Oct 9, 1992