NSN SA3003

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

0.310 inches maximum body outside diameter, unable to decode dc resistance rating in ohms, unable to decode inductance rating, 0.620 inches nominal body length, unable to decode coil form type.

NSN 5950-00-266-0631 Datasheet

(NSN) National Stock Number

5950-00-266-0631

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

00-266-0631

Requires Demilitarization

Yes

(INC) Item Name Code

06338

Date

Sun, Jan 1, 1961

Schedule B Code

8504500000

Body Length

0.620 inches nominal

Body Outside Diameter

0.310 inches maximum

Coil Form Type

unable to decode

Dc Resistance Rating In Ohms

unable to decode

Inductance Rating

unable to decode

Inclosure Type

open

Mounting Method

unable to decode

Overall Diameter

0.310 inches maximum

Overall Length

0.620 inches nominal

Rating Method

Reliability Indicator

not established

Terminal Type And Quantity

2 wire lead

Turn Quantity

unable to decode

Winding Conductor Size

unable to decode

Winding Operating Current

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0006338

Cross Reference

CAGE Codes

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

07886

Dar Electronics Inc Commercial Products Div Dba National Radio Co

U.s./canadian manufacturers

92149

Strux Corp

U.s./canadian manufacturers

15280

Northrop Grumman Systems Corporation Div Es Defensive Systems Division

U.s./canadian manufacturers

26916

Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp Div Multiple

U.s./canadian manufacturers

55631

Scomill Inc

U.s./canadian manufacturers

71313

Viking Technologies, Ltd.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34700

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

061980

Schedule B & Trade

Schedule B

8504-50-0000

Description

inductors, nesoi

End Use

20000 - Generators, accessories

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77125

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5950-00-266-0631?

   The FSCG of the NSN 5950-00-266-0631 is 5950

2. Does the NSN 5950-00-266-0631 have a Schedule B code assigned?

   Yes, the Schedule B code is 8504500000

3. Does NSN 5950-00-266-0631 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5950-00-266-0631 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5950-00-266-0631 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-00-266-0631 was assigned to the Federal Catalog?

   It was assigned 65 years ago, on Sun, Jan 1, 1961