NSN SDA-2115

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

nrsts end item identification, contact arrangement: spst-no; operate voltage: 4.5 to 30.0 vdc; time delay in seconds: fixed 2.0,adjustable 0.2 to 2.0; case: molded plastic cover; timing control: resistor adjustable; unit contains no coil; terminals: tin-plated for printed circuit board mtg; dimensions: length 1.285 inches max,width 0.795 inches max,height 0.500 inches max special features.

NSN 5945-01-330-0657 Datasheet

(NSN) National Stock Number

5945-01-330-0657

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5945 - Relays and Solenoids

(NIIN) National Item Identification Number

01-330-0657

Requires Demilitarization

Yes

(INC) Item Name Code

31446

Date

Thu, Nov 29, 1990

End Item Identification

nrsts

Special Features

contact arrangement: spst-no; operate voltage: 4.5 to 30.0 vdc; time delay in seconds: fixed 2.0,adjustable 0.2 to 2.0; case: molded plastic cover; timing control: resistor adjustable; unit contains no coil; terminals: tin-plated for printed circuit board mtg; dimensions: length 1.285 inches max,width 0.795 inches max,height 0.500 inches max

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0031446

Cross Reference

CAGE Codes

77342

Te Connectivity Corporation

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Questions & Answers

1. What is the FSCG of the NSN 5945-01-330-0657?

   The FSCG of the NSN 5945-01-330-0657 is 5945

2. Does NSN 5945-01-330-0657 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5945-01-330-0657 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5945-01-330-0657 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

5. When the NSN 5945-01-330-0657 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Thu, Nov 29, 1990