NSN SEAS S2

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

46.0 inches nominal overall height, 76.0 inches nominal overall width, splitter, 2 way (tv, r) with f-conn. part name assigned by controlling agency, linear frequency response up to 1000 mhz; connector: female; impedance: 75 ohms; screening factor: class a; operation temp: negative 40 to positive 60 degree celsius special features.

NSN 5985-01-685-9366 Datasheet

(NSN) National Stock Number

5985-01-685-9366

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5985 - Related Equipment, Waveguides and Antennas

(NIIN) National Item Identification Number

01-685-9366

Requires Demilitarization

Yes

(INC) Item Name Code

60411

Date

Wed, Jan 22, 2020

Schedule B Code

8529109000

Part Name Assigned By Controlling Agency

splitter, 2 way (tv, r) with f-conn.

Overall Height

46.0 inches nominal

Overall Width

76.0 inches nominal

Special Features

linear frequency response up to 1000 mhz; connector: female; impedance: 75 ohms; screening factor: class a; operation temp: negative 40 to positive 60 degree celsius

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0060411

Cross Reference

CAGE Codes

0FJP1

Zenitel Usa, Inc. Dba Zenitel Usa Inc

U.s./canadian manufacturers

Freight Information

Schedule B & Trade

Schedule B

8529-10-9000

Description

antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8524 to 8528, nesoi

End Use

21400 - Telecommunications equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76493

(NAICS) North American Industrial Classification System

334220

Questions & Answers

1. What is the FSCG of the NSN 5985-01-685-9366?

   The FSCG of the NSN 5985-01-685-9366 is 5985

2. Does the NSN 5985-01-685-9366 have a Schedule B code assigned?

   Yes, the Schedule B code is 8529109000

3. Does NSN 5985-01-685-9366 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5985-01-685-9366 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5985-01-685-9366 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5985-01-685-9366 was assigned to the Federal Catalog?

   It was assigned 6 years ago, on Wed, Jan 22, 2020