NSN SIMRAD GN33

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

aluminum alloy case material, gps/plotter part name assigned by controlling agency, all sizes of commercial, fishing and coastal vessels end item identification, 12.0 and 24.0 direct current voltage rating in volts, bracket or panel mounting type.

NSN 6605-01-522-9790 Datasheet

(NSN) National Stock Number

6605-01-522-9790

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6605 - Navigational Instruments

(NIIN) National Item Identification Number

01-522-9790

Requires Demilitarization

Yes

(INC) Item Name Code

00426

Date

Mon, Aug 16, 2004

Schedule B Code

9014900000

End Item Identification

all sizes of commercial, fishing and coastal vessels

Direct Current Voltage Rating In Volts

12.0 and 24.0

Material

aluminum alloy case

Part Name Assigned By Controlling Agency

gps/plotter

Mounting Type

bracket or panel

Output Intelligence Type

navigation course selected

Special Features

built-in chartplotter; integrated 14 channel gps receiver; waypoints, routes, lines and tracks; antenna position offset; relay for general alarms; relay for position missing alarms

Power Source

external

Terminal Location

back

Unpackaged Unit Length

10.00 inches nominal

Unpackaged Unit Height

2.80 inches nominal

Unpackaged Unit Width

5.80 inches nominal

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000426

Cross Reference

CAGE Codes

15342

Kongsberg Maritime Inc Dba Kongsberg Maritime Inc

Non-manufacturers

Freight Information

Schedule B & Trade

Schedule B

9014-90-0000

Description

parts & accessories for direction finding compasses and other navigational instruments and appliances

End Use

22220 - Marine engines, parts

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

87412

(NAICS) North American Industrial Classification System

334511

Questions & Answers

1. What is the FSCG of the NSN 6605-01-522-9790?

   The FSCG of the NSN 6605-01-522-9790 is 6605

2. Does the NSN 6605-01-522-9790 have a Schedule B code assigned?

   Yes, the Schedule B code is 9014900000

3. Does NSN 6605-01-522-9790 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 6605-01-522-9790 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6605-01-522-9790 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6605-01-522-9790 was assigned to the Federal Catalog?

   It was assigned 22 years ago, on Mon, Aug 16, 2004