NSN SL4056

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

2 coil quantity, hermetic environmental protection, continuous duty type, unable to decode center to center distance between mounting facilities parallel to width, unable to decode center to center distance between mounting facilities parallel to length.

NSN 5945-00-824-8729 Datasheet

(NSN) National Stock Number

5945-00-824-8729

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5945 - Relays and Solenoids

(NIIN) National Item Identification Number

00-824-8729

Requires Demilitarization

Yes

(INC) Item Name Code

32512

Date

Tue, Jan 1, 1963

Schedule B Code

8536490050

Center To Center Distance Between Mounting Facilities Parallel To Width

unable to decode

Center To Center Distance Between Mounting Facilities Parallel To Length

unable to decode

Coil Quantity

2

Duty Type

continuous

Environmental Protection

hermetic

Features Provided

latching contacts and polarized

Main Contact Load Current Rating At Maximum Rated Voltage

Main Contact Maximum Voltage Rating In Volts

115.0 ac and 28.0 dc

Pile-Up Main Contact Form Arrangement

2c

Mounting Facility Pattern

unable to decode

Mounting Facility Type And Quantity

4 unthreaded hole(s) single mounting facility

Nonpile-Up Main Contact Arrangement

2 pole, double throw, one position momentary

Operating Voltage Rating And Type At Specified Temp

unable to decode

Overall Height

0.890 inches maximum

Overall Length

1.375 inches maximum

Overall Width

0.391 inches nominal

Terminal Type And Quantity

unable to decode

Time Delay

unable to decode

Unthreaded Mounting Hole Diameter

unable to decode

Winding Dc Resistance Rating

unable to decode

Winding Quantity

2

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0032512

Cross Reference

CAGE Codes

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

77342

Te Connectivity Corporation

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-49-0050

Description

relays, electromechanical, with contacts rated at less than 10 a, for a voltage exceeding 60 v but not exceeding 1000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77254

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5945-00-824-8729?

   The FSCG of the NSN 5945-00-824-8729 is 5945

2. Does the NSN 5945-00-824-8729 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536490050

3. Does NSN 5945-00-824-8729 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5945-00-824-8729 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5945-00-824-8729 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5945-00-824-8729 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963