NATO Stock Number
5925-00-106-6987
Sold in multiples of
1 EA
DEMIL
NO
Body Style
Single pole type
Bushing Length
Between 0.360 inches and 0.380 inches
Body Length
Between 1.448 inches and 1.510 inches
Body Width
Between 0.567 inches and 0.629 inches
Case Material
Metal
Center To Center Distance Between Terminals Parallel To Length
Between 0.870 inches and 0.880 inches
Fragility Factor
Moderately rugged
Mounting Surface To Terminal End Distance
Between 1.524 inches and 1.586 inches
Pole Quantity
1
Arc Quenching Method
Magnetic blowout
Mounting Facility Type And Quantity
1 threaded bushing w/panel seal
Storage Type
General purpose warehouse
Thready Qty Per Inch (tpi)
32
Maximum Continuous Load Current Rating Per Pole
2.0 amperes ac single location
Operating Voltage Type And Rating Per Pole In Volts
240.0 ac single location
Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps
300.0 ac single location
Circuit Protection Type
Overcurrent single location
Trip Release Method
Magnetic single location
Trip Release Characteristic
Time delay single location
Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent
125.0 single location
Reset Method
Manual
Main Contact Tripping Mechanism Type
Trip free
Manual Actuator Type And Quantity
1 toggle
Actuator Function
Trip-reset
Actuator Position Designation
At pole one
Internal Trip Release Configuration
Series trip single location
Thread Size
0.375 inches
Trip Delay Time In Seconds Per Rated Continuous Current
0.500 at 200 pct single location and 9.000 at 200 pct single location and 1.750 at 400 pct single location
Inclosure Protection Type For Which Designed
Fungus resistant and hermetically sealed
Frequency In Hertz
400.0 single location
Test Data Document
81349-mil-c-39019 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Thread Series Designator
Unef
Terminal Type And Quantity
2 wire hook