NSN SN54L20J

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

0.755 inches minimum and 0.785 inches maximum body length, 0.245 inches minimum and 0.280 inches maximum body width, 0.180 inches nominal body height, low power and hermetically sealed and monolithic features provided, 2 gate, nand design function and quantity.

NSN 5962-00-232-0150 Datasheet

(NSN) National Stock Number

5962-00-232-0150

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5962 - Electronic Microcircuits

(NIIN) National Item Identification Number

00-232-0150

Requires Demilitarization

Yes

(INC) Item Name Code

31779

Date

Sun, May 27, 1973

Schedule B Code

8542900000

Body Height

0.180 inches nominal

Body Length

0.755 inches minimum and 0.785 inches maximum

Body Width

0.245 inches minimum and 0.280 inches maximum

Design Function And Quantity

2 gate, nand

Features Provided

low power and hermetically sealed and monolithic

Inclosure Configuration

dual-in-line

Inclosure Material

ceramic

Input Circuit Pattern

dual 4 input

Operating Temp Range

-55.0 to 125.0 celsius

Output Logic Form

transistor-transistor logic

Overall Height

0.330 inches nominal

Specification/Standard Data

07690-429560-03 manufacturers source control

Storage Temp Range

-65.0 to 150.0 celsius

Terminal Surface Treatment

solder

Terminal Type And Quantity

14 printed circuit

Time Rating Per Chacteristic

60.00 nanoseconds maximum propagation delay time, low to high level output and 60.00 nanoseconds maximum propagation delay time, high to low level output

Voltage Rating And Type Per Characteristic

8.0 volts maximum power source

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0031779

Cross Reference

CAGE Codes

07690

Bae Systems Controls Inc

U.s./canadian manufacturers

27014

National Semiconductor Corporation

U.s./canadian manufacturers

01295

Texas Instruments Incorporated

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

3 - Electrostatic sensitive device (esd)

Uniform Freight Classification Item Number

34580

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061700

Schedule B & Trade

Schedule B

8542-90-0000

Description

electronic integrated circuits and microassembly parts

End Use

21320 - Semiconductors

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77689

(NAICS) North American Industrial Classification System

334413

Questions & Answers

1. What is the FSCG of the NSN 5962-00-232-0150?

   The FSCG of the NSN 5962-00-232-0150 is 5962

2. Does the NSN 5962-00-232-0150 have a Schedule B code assigned?

   Yes, the Schedule B code is 8542900000

3. Does NSN 5962-00-232-0150 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 5962-00-232-0150 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5962-00-232-0150 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5962-00-232-0150 was assigned to the Federal Catalog?

   It was assigned 53 years ago, on Sun, May 27, 1973