NSN SNAP

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

crown set dental temp c/0 4 shades pwdr 1 liq crown/bridge matls part name assigned by controlling agency, consist of four shades of powder,62-65-69-77; one liquid; crown and bridge materials special features, not included cutout for adapting to tooth curvature.

NSN 6520-01-266-3783 Datasheet

(NSN) National Stock Number

6520-01-266-3783

(FSG) Federal Supply Group

65 - Medical, Dental, and Veterinary Equipment and Supplies

(FSC) Federal Supply Classification

6520 - Supplies, Equipment and Dental Instruments

(NIIN) National Item Identification Number

01-266-3783

Requires Demilitarization

Yes

(INC) Item Name Code

24290

Date

Fri, Oct 23, 1987

Schedule B Code

9021290000

Cutout For Adapting To Tooth Curvature

not included

Part Name Assigned By Controlling Agency

crown set dental temp c/0 4 shades pwdr 1 liq crown/bridge matls

Special Features

consist of four shades of powder,62-65-69-77; one liquid; crown and bridge materials

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0024290

Cross Reference

CAGE Codes

0NUS8

Henry Schein, Inc. Div Usdg Federal Division

Non-manufacturers

64682

Schein Henry Inc

Non-manufacturers

2L070

Darby-Kent Institutional Supply Co Inc

U.s./canadian manufacturers

66735

Air Force Medical Logistics Office

U.s./canadian manufacturers

24040

Parkell, Inc. Dba Parkell Inc

U.s./canadian manufacturers

0HST1

Weber Scientific, Inc.

Non-manufacturers

Freight Information

Air Commodity

MD -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

J - 100.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

R - Flammable liquids, un class 3 (flammable liquids label)

Uniform Freight Classification Item Number

73820

Water Commodity

531 - Dental goods (not requiring temperature control)

National Motor Freight Classification Item Number

056640

Schedule B & Trade

Schedule B

9021-29-0000

Description

dental fittings and parts and accessories

End Use

41050 - Cell phones and other household goods, n.e.c.

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

89965

(NAICS) North American Industrial Classification System

339116

Questions & Answers

1. What is the FSCG of the NSN 6520-01-266-3783?

   The FSCG of the NSN 6520-01-266-3783 is 6520

2. Does the NSN 6520-01-266-3783 have a Schedule B code assigned?

   Yes, the Schedule B code is 9021290000

3. Does NSN 6520-01-266-3783 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6520-01-266-3783 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6520-01-266-3783 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6520-01-266-3783 was assigned to the Federal Catalog?

   It was assigned 38 years ago, on Fri, Oct 23, 1987