NSN SR835E104ZAA

An item having either a single tapped winding (autotransformer type), or two or more windings designed to furnish inductive reactance and/or transfer electrical energy in circuits by means of a magnetic field. It is so designed that its entire intended range of operations is above 20 kilohertz (kilocycles). The minimum value may extend into the audio frequency range (below 20 kilohertz). It may include integral capacitors, coils, resistors, and adjustable tuning cores. For items having only two active terminals see coil, radio frequency. Includes types having windings which may be moved with respect to each other. Excludes:transformer, discriminator.

w/o mtg facilities terminal(s) on one surface body style, 0.500 inches maximum body width, 0.100 microfarads single section capacitance value per section, 0.500 inches maximum body length, 0.200 inches maximum body height.

NSN 5910-00-726-7004 Datasheet

(NSN) National Stock Number

5910-00-726-7004

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-726-7004

Requires Demilitarization

Yes

(INC) Item Name Code

00007

Date

Wed, Mar 29, 1972

Schedule B Code

8532290040

Body Height

0.200 inches maximum

Body Length

0.500 inches maximum

Body Style

w/o mtg facilities terminal(s) on one surface

Body Width

0.500 inches maximum

Capacitance Value Per Section

0.100 microfarads single section

Center To Center Distance Between Terminals Parallel To Length

0.400 inches nominal

Insulation Resistance At Reference Temp

1000.0 megohm-microfarads

Material

ceramic case

Nonderated Operating Temp

-55.0 celsius minimum and 150.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

500.0 dc single section

Power Factor At Reference Temp In Percent

2.5000

Reliability Indicator

established

Schematic Diagram Designator

no common or grounded electrode(s)

Terminal Length

1.500 inches minimum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Test Data Document

50082-10138 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

Tolerance Range Per Section

-20.00 to 20.00 percent single section

Voltage Temp Limits Per Section In Percent Capacitance Change

-25.0 to 15.0 without voltage applied single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000007

Cross Reference

CAGE Codes

28480

Hewlett-Packard Company Dba Hp

U.s./canadian manufacturers

7ZXR5

Keysight Technologies Inc

U.s./canadian manufacturers

56289

Sprague Electric Co World Hqs

U.s./canadian manufacturers

10138

Astronautics Corporation of America

U.s./canadian manufacturers

18796

Murata Erie North America Inc State College Opns

U.s./canadian manufacturers

72982

Erie Specialty Products Inc

U.s./canadian manufacturers

20932

Illinois Tool Works Inc Emcon Div

U.s./canadian manufacturers

04222

Kyocera Avx Components Corporation

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-726-7004?

   The FSCG of the NSN 5910-00-726-7004 is 5910

2. Does the NSN 5910-00-726-7004 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-00-726-7004 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-726-7004 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-726-7004 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-726-7004 was assigned to the Federal Catalog?

   It was assigned 54 years ago, on Wed, Mar 29, 1972