NSN SR8FF3G2

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.5000 inches nominal bore diameter, contact bearing seal type, radial load direction, 0.0002 inches minimum radial and 0.0004 inches maximum radial internal clearance, straight bore shape.

NSN 3110-00-727-7271 Datasheet

(NSN) National Stock Number

3110-00-727-7271

(FSG) Federal Supply Group

31 - Bearings

(FSC) Federal Supply Classification

3110 - Unmounted Antifriction Bearings

(NIIN) National Item Identification Number

00-727-7271

Requires Demilitarization

Yes

(INC) Item Name Code

00014

Date

Sun, Jan 1, 1961

Schedule B Code

8482105028

Bearing Seal Type

contact

Bore Diameter

0.5000 inches nominal

Bore Shape

straight

Internal Clearance

0.0002 inches minimum radial and 0.0004 inches maximum radial

Load Direction

radial

Lubrication Material Document And Classification

mil-g-23827 mil spec single material response

Lubrication Material

grease

Material

rubber synthetic seal

Material

steel corrosion resisting ball

Material

steel corrosion resisting inner ring

Material

steel corrosion resisting outer ring

Material

steel corrosion resisting retainer

Overall Outside Diameter

1.1250 inches nominal

Overall Width

0.3125 inches nominal

Retainer Fabrication Method

pressed

Seal Quantity

2

Standard Tolerance Designation

abec no.7

Style Designator

non-loading groove, non-separable

Surface Finish

ground

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0000014

Cross Reference

CAGE Codes

70854

Schaeffler Aerospace Usa Corp Div Schaeffler Aerospace Usa Corporation

U.s./canadian manufacturers

F9037

Barden Sarl

Non-us manufacturer (nato), other foreign organization or codification bureaus

50294

New Hampshire Ball Bearings Inc Div Precision Division

U.s./canadian manufacturers

24617

General Motors Corp

U.s./canadian manufacturers

43334

General Motors Corp Delco Moraine Ndh Div

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

58860

Water Commodity

742 - Bearings

National Motor Freight Classification Item Number

114820

Schedule B & Trade

Schedule B

8482-10-5028

Description

angular contact ball bearings, nesoi

End Use

21180 - Industrial machines, other

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

74610

(NAICS) North American Industrial Classification System

332991

Questions & Answers

1. What is the FSCG of the NSN 3110-00-727-7271?

   The FSCG of the NSN 3110-00-727-7271 is 3110

2. Does the NSN 3110-00-727-7271 have a Schedule B code assigned?

   Yes, the Schedule B code is 8482105028

3. Does NSN 3110-00-727-7271 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 3110-00-727-7271 contain precious materials?

   Precious metal content is unknown

5. Does NSN 3110-00-727-7271 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 3110-00-727-7271 was assigned to the Federal Catalog?

   It was assigned 65 years ago, on Sun, Jan 1, 1961