NSN SRC-10

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

diagonal joint joint style, 0.125 inches nominal material thickness, 1.062 inches nominal inside diameter, outside grooved, straight face cross-sectional shape style, hydraulic system,acft fsc application data.

NSN 5330-00-684-3968 Datasheet

(NSN) National Stock Number

5330-00-684-3968

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5330 - Packing and Gasket Materials

(NIIN) National Item Identification Number

00-684-3968

Requires Demilitarization

Yes

(INC) Item Name Code

20256

Date

Tue, Jan 1, 1963

Schedule B Code

8412909005

Cross-Sectional Shape Style

outside grooved, straight face

Fsc Application Data

hydraulic system,acft

Inside Diameter

1.062 inches nominal

Joint Style

diagonal joint

Material Thickness

0.125 inches nominal

Outer Edge Thickness

0.094 inches nominal

Outside Diameter

1.282 inches nominal

Ring Style

concentric

Test Data Document

"81349-mil-s-5049 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0020256

Cross Reference

CAGE Codes

30438

Delta Mfg and Sales Inc

U.s./canadian manufacturers

83908

Ace Products Co of Toledo Inc Dba Ace Products

U.s./canadian manufacturers

96679

Gad-Jets Inc Dba Associated Technical Sales

U.s./canadian manufacturers

95725

Industrial Supplies

U.s./canadian manufacturers

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

26303

Greene Tweed and Co Advantec Div

U.s./canadian manufacturers

09257

Trelleborg Sealing Solutions Us, Inc.

U.s./canadian manufacturers

97820

Shamban Polymer Tech Group

U.s./canadian manufacturers

25942

Scrapper Rings Co Div of Roberts Tool Co

U.s./canadian manufacturers

Freight Information

Air Commodity

AZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

Q - 70.0

National Motor Freight Class Rating

W - Rating variable

Special Handling

Z - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Schedule B & Trade

Schedule B

8412-90-9005

Description

parts of linear acting hydraulic power engines and motors

End Use

21100 - Industrial engines

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

71899

(NAICS) North American Industrial Classification System

333995

Questions & Answers

1. What is the FSCG of the NSN 5330-00-684-3968?

   The FSCG of the NSN 5330-00-684-3968 is 5330

2. Does the NSN 5330-00-684-3968 have a Schedule B code assigned?

   Yes, the Schedule B code is 8412909005

3. Does NSN 5330-00-684-3968 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5330-00-684-3968 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5330-00-684-3968 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5330-00-684-3968 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963