NSN SRCBA1319

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes:carbon composition type resistors.

0.076 inches minimum and 0.083 inches maximum cross-sectional thickness, metal and synthetic rubber cross-sectional shape style, 2.365 inches minimum and 2.385 inches maximum center to center distance between bolt holes along length, 2.365 inches minimum and 2.385 inches maximum center to center distance between bolt holes along width, 1.970 inches minimum and 2.030 inches maximum aperture diameter.

NSN 5330-00-702-1504 Datasheet

(NSN) National Stock Number

5330-00-702-1504

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5330 - Packing and Gasket Materials

(NIIN) National Item Identification Number

00-702-1504

Requires Demilitarization

Yes

(INC) Item Name Code

04522

Date

Sun, Jan 1, 1961

Schedule B Code

7616995195

Aperture Diameter

1.970 inches minimum and 2.030 inches maximum

Center To Center Distance Between Bolt Holes Along Length

2.365 inches minimum and 2.385 inches maximum

Center To Center Distance Between Bolt Holes Along Width

2.365 inches minimum and 2.385 inches maximum

Cross-Sectional Shape Style

metal and synthetic rubber

Cross-Sectional Thickness

0.076 inches minimum and 0.083 inches maximum

Hole Diameter

0.281 inches minimum and 0.288 inches maximum

Material Document And Classification

unable to decode

Material

Outside Corner Radius

0.470 inches minimum and 0.530 inches maximum

Outside Edge To Bolt Hole Center Distance Along Length

0.470 inches minimum and 0.530 inches maximum

Outside Edge To Bolt Hole Center Distance Along Width

0.470 inches minimum and 0.530 inches maximum

Overall Length

3.345 inches minimum and 3.405 inches maximum

Overall Width

3.345 inches minimum and 3.405 inches maximum

Surface Treatment Document And Classification

unable to decode

Surface Treatment

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0004522

Cross Reference

CAGE Codes

04034

Setra Systems, Inc. Dba Gems Sensors

U.s./canadian manufacturers

83259

Parker-Hannifin Corporation Dba Pneutronics Div Composite Sealing Systems Division

U.s./canadian manufacturers

76301

The Boeing Company Div Defense

U.s./canadian manufacturers

95272

Stillman Seal Corporation Div Stillman Seal Corperation

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

95100

Water Commodity

596 - Gaskets, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

194120

Schedule B & Trade

Schedule B

7616-99-5195

Description

articles of aluminum nesoi

End Use

12300 - Finished metal shapes

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69979

(NAICS) North American Industrial Classification System

332999

Questions & Answers

1. What is the FSCG of the NSN 5330-00-702-1504?

   The FSCG of the NSN 5330-00-702-1504 is 5330

2. Does the NSN 5330-00-702-1504 have a Schedule B code assigned?

   Yes, the Schedule B code is 7616995195

3. Does NSN 5330-00-702-1504 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5330-00-702-1504 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5330-00-702-1504 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5330-00-702-1504 was assigned to the Federal Catalog?

   It was assigned 65 years ago, on Sun, Jan 1, 1961