NSN SS02A40

A switch that is externally actuated by a device such as a push rod or button, which requires pushing for each actuation. The action may be momentary, with mechanical return. It consists of a body,switch and a push button. The item may include provisions for mounting indicating lamps or light emitting diodes in the actuator. Includes items consisting of individually separable switches that are physically interlocked, that have a common actuator, or are electrically connected. Excludes: light-switch; light-switch assembly; switch,beam selecting,headlight; switch,foot; switch,interlock; switch,pressure; switch,push-pull; switch,sensitive and switch assembly. For devices which start, stop, reverse, select and/or regulate the speed of a motor, see starter,motor and controller,motor.

round actuator style, 1.085 inches minimum and 1.135 inches maximum actuator free position height, 0.040 pretravel inches maximum and 0.050 overtravel inches minimum and 0.007 differential inches maximum actuator movement, 0.219 inches maximum actuator diameter, 0.984 inches maximum body height.

NSN 5930-00-105-5338 Datasheet

(NSN) National Stock Number

5930-00-105-5338

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-105-5338

Requires Demilitarization

Yes

(INC) Item Name Code

00399

Date

Fri, Jul 12, 1968

Schedule B Code

8536509050

Actuator Diameter

0.219 inches maximum

Actuator Free Position Height

1.085 inches minimum and 1.135 inches maximum

Actuator Style

round

Actuator Movement

0.040 pretravel inches maximum and 0.050 overtravel inches minimum and 0.007 differential inches maximum

Body Height

0.984 inches maximum

Body Length

1.922 inches minimum and 1.952 inches maximum

Body Style

hole mounted

Body Width

0.672 inches minimum and 0.702 inches maximum

Center To Center Distance Between Mounting Facilities Parallel To Length

0.998 inches minimum and 1.002 inches maximum

Contact Load Current Rating At Maximum Rated Voltage

2.000 amperes resistive dc and 1.000 amperes inductive dc and 1.500 amperes lamp dc and 15.000 amperes resistive ac and 15.000 amperes inductive ac and 1.500 amperes lamp ac

Inclosure Type

uninclosed

Material

plastic case

Maximum Voltage Rating In Volts

115.0 ac and 28.0 dc

Mounting Method

unthreaded hole(s)

Nonpile-Up Contact Arrangement

unable to decode

Overall Length

1.937 inches nominal

Overall Width

0.687 inches nominal

Switch Release Force

4.0 ounces minimum

Switch Actuating Force

20.0 ounces maximum

Terminal Type And Quantity

3 tab, solder lug

Test Data Document

"81349-mils8805 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Unthreaded Mounting Hole Diameter

0.139 inches minimum and 0.143 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000399

Cross Reference

CAGE Codes

81350

Joint Army-Navy Specifications Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9050

Description

switches, slide, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-105-5338?

   The FSCG of the NSN 5930-00-105-5338 is 5930

2. Does the NSN 5930-00-105-5338 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509050

3. Does NSN 5930-00-105-5338 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-105-5338 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-105-5338 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-105-5338 was assigned to the Federal Catalog?

   It was assigned 58 years ago, on Fri, Jul 12, 1968