NSN SSD0.39

A headless, generally cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 mm); for items whose length exceeds twelve inches (304 mm); see rod,straight,headless. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also pin,straight,threaded.

unable to decode inductance rating, unable to decode coil form type, unable to decode core construction, unable to decode dc resistance rating in ohms, 0.390 inches minimum and 0.430 inches maximum body length.

NSN 5950-01-394-7168 Datasheet

(NSN) National Stock Number

5950-01-394-7168

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

01-394-7168

Requires Demilitarization

Yes

(INC) Item Name Code

06338

Date

Sat, Aug 13, 1994

Schedule B Code

8504500000

Body Length

0.390 inches minimum and 0.430 inches maximum

Coil Form Type

unable to decode

Core Construction

unable to decode

Dc Resistance Rating In Ohms

unable to decode

Inductance Rating

unable to decode

Inclosure Type

fully inclosed

Maximum Operating Temp

105.0 celsius

Mounting Method

unable to decode

Overall Diameter

0.152 inches minimum and 0.172 inches maximum

Quality Factor

unable to decode

Rating Method

unable to decode

Reliability Failure Rate Level In Percent

0.010

Reliability Indicator

established

Specification/Standard Data

81349-mil-c-39010/1 government specification

Terminal Type And Quantity

2 wire lead

Test Data Document

"81349-mil-c-39010 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Winding Operating Current

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0006338

Cross Reference

CAGE Codes

09021

Airco Inc Airco Electronics

U.s./canadian manufacturers

99800

American Precision Industries Inc.

U.s./canadian manufacturers

72259

Nytronics Inc

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

32159

West Cap Arizona

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34700

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

061980

Schedule B & Trade

Schedule B

8504-50-0000

Description

inductors, nesoi

End Use

20000 - Generators, accessories

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77125

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5950-01-394-7168?

   The FSCG of the NSN 5950-01-394-7168 is 5950

2. Does the NSN 5950-01-394-7168 have a Schedule B code assigned?

   Yes, the Schedule B code is 8504500000

3. Does NSN 5950-01-394-7168 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5950-01-394-7168 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5950-01-394-7168 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-01-394-7168 was assigned to the Federal Catalog?

   It was assigned 32 years ago, on Sat, Aug 13, 1994