NSN STD323-18

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

plastic material, 0.750 inches nominal closed end overall diameter, 0.562 inches nominal length under shoulder.

NSN 5340-00-453-4040 Datasheet

(NSN) National Stock Number

5340-00-453-4040

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-453-4040

Requires Demilitarization

Yes

(INC) Item Name Code

13435

Date

Fri, May 8, 1970

Schedule B Code

3926904500

Closed End Overall Diameter

0.750 inches nominal

Length Under Shoulder

0.562 inches nominal

Material

plastic

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0013435

Cross Reference

CAGE Codes

K1464

Goodrich Control Systems Ltd T/a Goodrich Engine Control Systems

Non-us manufacturer (nato), other foreign organization or codification bureaus

U4287

Rolls-Royce Controls and Data Services Limited

Non-us manufacturer (nato), other foreign organization or codification bureaus

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Schedule B & Trade

Schedule B

3926-90-4500

Description

gaskets,washers & other seals

End Use

12770 - Other industrial supplies

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

89399

(NAICS) North American Industrial Classification System

339991

Questions & Answers

1. What is the FSCG of the NSN 5340-00-453-4040?

   The FSCG of the NSN 5340-00-453-4040 is 5340

2. Does the NSN 5340-00-453-4040 have a Schedule B code assigned?

   Yes, the Schedule B code is 3926904500

3. Does NSN 5340-00-453-4040 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5340-00-453-4040 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5340-00-453-4040 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-00-453-4040 was assigned to the Federal Catalog?

   It was assigned 56 years ago, on Fri, May 8, 1970