NSN SW2846

115.0 ac at sea level contact voltage rating in volts, 3.0 amperes resistive load and 2.0 amperes inductive load dc at sea level contact load current rating, 28.0 dc at sea level contact voltage rating in volts, breaks before makes each section periphery contact switching action, 5.0 amperes resistive load ac at sea level contact load current rating.

NSN 5930-01-082-2080 Datasheet

(NSN) National Stock Number

5930-01-082-2080

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-082-2080

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Tue, Aug 28, 1979

Schedule B Code

8536509020

Contact Load Current Rating

3.0 amperes resistive load and 2.0 amperes inductive load dc at sea level

Contact Load Current Rating

5.0 amperes resistive load ac at sea level

Contact Switching Action

breaks before makes each section periphery

Contact Voltage Rating In Volts

115.0 ac at sea level

Contact Voltage Rating In Volts

28.0 dc at sea level

Detent Rotational Torque Range

+1.000 to 6.000 inch-pounds single actuator

First Flat Length

0.240 inches minimum and 0.385 inches maximum single actuator

Flat Height

0.205 inches minimum and 0.220 inches maximum single actuator

Hazardous Locations/Environmental Protection

explosion proof

Individual Section Quantity

8

Mounting Method

threaded bushing with panel seal single mounting facility

Nominal Thread Size

0.375 inches single mounting facility

Nonturn Device Radius

0.530 inches nominal at 5:00 oclock

Nonturn Device Type

tab at 5:00 oclock

Operating Temp Range

-65.0 to 125.0 celsius

Overall Diameter

1.875 inches maximum

Overall Length

4.500 inches maximum

Pole Quantity

1 each section periphery

Precious Material And Location

contact surfaces gold and terminals silver

Precious Material

gold and silver

Shaft Diameter

0.249 inches nominal single actuator

Shaft Flat/Slot Angular Location

105.0 degrees from nonturn device single actuator

Shaft Type

round, flatted single actuator

Shaft Length

0.600 inches nominal single actuator

Style Designator

tap, circular, bushing mount

Switch Actuator Indexing Position Quantity

12 single actuator

Switch Actuator Positioning Increment

30.0 degrees single actuator

Switch Actuator Stop Device Type

fixed stop single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab, solder lug

Thread Class

2a single mounting facility

Thread Length

0.400 inches nominal single mounting facility

Thread Series Designator

unable to decode

Thread Series Designator

unef single mounting facility

Throw Quantity

12 each section periphery

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

C - Item contains combination of two or more precious metals (silver, gold, platinum).

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

18876

Us Army Aviation and Missile Command

Government departments or units, including military organizations

91812

Janco Corporation Dba Janco Corp Div Mason Controls

U.s./canadian manufacturers

04426

Illinois Tool Works Inc Dba Illinois Tool Works Inc Div Illinois Tool Works

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-082-2080?

   The FSCG of the NSN 5930-01-082-2080 is 5930

2. Does the NSN 5930-01-082-2080 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-01-082-2080 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-082-2080 contain precious materials?

   Item contains combination of two or more precious metals (silver, gold, platinum).

5. Does NSN 5930-01-082-2080 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-082-2080 was assigned to the Federal Catalog?

   It was assigned 47 years ago, on Tue, Aug 28, 1979