NSN SW43853

A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also resistor, vaiable (as modified).

0.690 inches nominal body diameter, 1.400 inches nominal body length, nonpivoted actuator style, 0.375 inches nominal actuator width, 0.760 inches nominal actuator height.

NSN 5930-01-264-2537 Datasheet

(NSN) National Stock Number

5930-01-264-2537

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-264-2537

Requires Demilitarization

Yes

(INC) Item Name Code

00406

Date

Sun, Sep 27, 1987

Schedule B Code

8536509035

Actuator Height

0.760 inches nominal

Actuator Style

nonpivoted

Actuator Width

0.375 inches nominal

Body Diameter

0.690 inches nominal

Body Length

1.400 inches nominal

Body Style

bushing mounted

Bushing Length

0.380 inches nominal

Contact Load Current Rating At Maximum Rated Voltage

2.000 amperes lamp dc

Inclosure Type

fully inclosed

Maximum Voltage Rating In Volts

30.0 dc

Terminal Type And Quantity

2 pin

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000406

Cross Reference

CAGE Codes

07150

Electro-Mech Components, Inc. Dba Electro-Mech Components Inc

U.s./canadian manufacturers

97564

Electro-Mech Components, Inc. Dba Pendar Switchlight Div Pendar Switchlight

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9035

Description

switches, push-button, rated at over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-264-2537?

   The FSCG of the NSN 5930-01-264-2537 is 5930

2. Does the NSN 5930-01-264-2537 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509035

3. Does NSN 5930-01-264-2537 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-264-2537 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5930-01-264-2537 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-264-2537 was assigned to the Federal Catalog?

   It was assigned 39 years ago, on Sun, Sep 27, 1987