NSN T330C686K006AS

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

0.375 inches maximum body length, solid anode type, 0.340 inches maximum body width, los angeles class ssn (688), ticonderoga class cg 947), spruance class dd (963), sturgeon class ssn (637), forrestal class cv, virginia class cgn (41). an/wrr-7 communications systems. consolidated spae operations center. mx peacekeeper missle support equipment. end item identification, 0.185 inches maximum body height.

NSN 5910-01-051-1771 Datasheet

(NSN) National Stock Number

5910-01-051-1771

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-051-1771

Requires Demilitarization

Yes

(INC) Item Name Code

00008

Date

Fri, Nov 25, 1977

Schedule B Code

8532290040

End Item Identification

los angeles class ssn (688), ticonderoga class cg 947), spruance class dd (963), sturgeon class ssn (637), forrestal class cv, virginia class cgn (41). an/wrr-7 communications systems. consolidated spae operations center. mx peacekeeper missle support equipment.

Anode Type

solid

Body Height

0.185 inches maximum

Body Length

0.375 inches maximum

Body Width

0.340 inches maximum

Body Style

w/o mtg facilities terminal(s) on one surface

Capacitive Electrode Material

tantalum

Capacitance Value Per Section

68.000 microfarads single section

Center To Center Distance Between Terminals Parallel To Length

0.200 inches nominal

Criticality Code Justification

feat

Dc Leakage At Reference Temp

1.000 microamperes

Dissipation Factor At Reference Temp In Percent

6.0000

Electrical Polarization

polarized

Material

plastic case

Nonderated Operating Temp

-55.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

6.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Special Features

weapon system essential

Terminal Diameter

0.025 inches nominal

Terminal Length

1.500 inches nominal

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Tolerance Range Per Section

-10.00 to 10.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000008

Cross Reference

CAGE Codes

89536

Fluke Corp

U.s./canadian manufacturers

21921

Rca Corp Distributor and Special Products Div

U.s./canadian manufacturers

31433

Kemet Electronics Corporation

U.s./canadian manufacturers

05397

Union Carbide Corp Materials Systems Div

U.s./canadian manufacturers

61637

Danbury Union Carbide Corp Sub of Dow Co the

U.s./canadian manufacturers

90201

Mallory Sonalert Products, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-051-1771?

   The FSCG of the NSN 5910-01-051-1771 is 5910

2. Does the NSN 5910-01-051-1771 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-051-1771 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-051-1771 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-01-051-1771 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-051-1771 was assigned to the Federal Catalog?

   It was assigned 48 years ago, on Fri, Nov 25, 1977