NSN TEB132070

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

6.310 inches nominal body length, trip-reset actuator function, at pole two actuator position designation, 3.380 inches nominal body height, multipole-single actuator type body style.

NSN 5925-01-108-8026 Datasheet

(NSN) National Stock Number

5925-01-108-8026

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

01-108-8026

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Fri, Mar 6, 1981

Schedule B Code

8536200040

Actuator Function

trip-reset

Actuator Position Designation

at pole two

Body Height

3.380 inches nominal

Body Length

6.310 inches nominal

Body Style

multipole-single actuator type

Body Width

4.105 inches minimum and 4.125 inches maximum

Boss Height

0.250 inches nominal

Center To Center Distance Between Terminals Parallel To Length

5.250 inches nominal

Center To Center Distance Between Terminals Parallel To Width

1.380 inches nominal

Circuit Protection Type

overcurrent all locations

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

4.880 inches nominal

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

1.380 inches nominal

Fragility Factor

moderately rugged

Frequency In Hertz

60.0 all locations

Inclosure Protection Type For Which Designed

corrosion resistant

Main Contact Tripping Mechanism Type

trip free

Manual Actuator Type And Quantity

1 toggle

Material

plastic case

Maximum Continuous Load Current Rating Per Pole

70.0 amperes ac all locations

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

10000.0 ac all locations

Mounting Facility Type And Quantity

2 threaded hole(s) and 2 unthreaded hole(s)

Nominal Thread Size

0.138 inches

Operating Voltage Type And Rating Per Pole In Volts

240.0 ac all locations

Pole Quantity

3

Reset Method

manual

Special Handling Feature

magnetic

Specification/Standard Data

81348-w-c-375/12 government specification

Storage Type

general purpose warehouse

Terminal Type And Quantity

6 compression

Test Data Document

"81348-w-c-375 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Quantity Per Inch

32

Thread Series Designator

unified national coarse (unc)

Trip Delay Time In Seconds Per Rated Continuous Current

6.000 maximum at 200 pct all locations

Trip Release Ambient Temp Rating

40.0 celsius nominal all locations

Trip Release Characteristic

time delay all locations

Trip Release Method

thermal-magnetic all locations

Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

135.0 all locations

Unthreaded Mounting Hole Diameter

0.188 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

03497

General Electric Co Outdoor Breaker Business Section

U.s./canadian manufacturers

60099

General Electric Co Distribution Equipment Div

U.s./canadian manufacturers

60969

General Electric Co Electrical Distribution and Control

U.s./canadian manufacturers

81348

Federal Specifications Promulgated by General Services Administration Washington Dc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-01-108-8026?

   The FSCG of the NSN 5925-01-108-8026 is 5925

2. Does the NSN 5925-01-108-8026 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-01-108-8026 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-01-108-8026 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5925-01-108-8026 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-01-108-8026 was assigned to the Federal Catalog?

   It was assigned 45 years ago, on Fri, Mar 6, 1981