NSN TF903-2

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

consists of 8 each components general characteristics item description, 29154863971 end item identification.

NSN 2915-00-296-6286 Datasheet

(NSN) National Stock Number

2915-00-296-6286

(FSG) Federal Supply Group

29 - Engine Accessories

(FSC) Federal Supply Classification

2915 - Aircraft and Missile Prime Movers Engine Fuel System Components

(NIIN) National Item Identification Number

00-296-6286

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Sun, Jan 1, 1961

End Item Identification

29154863971

General Characteristics Item Description

consists of 8 each components

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

1401356

Cross Reference

CAGE Codes

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

59875

Eaton Corp Dba Eaton Aerospace Jackson

U.s./canadian manufacturers

Freight Information

Air Commodity

AZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

Z - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

64870

Water Commodity

594 - Pumps and parts, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

128000

Questions & Answers

1. What is the FSCG of the NSN 2915-00-296-6286?

   The FSCG of the NSN 2915-00-296-6286 is 2915

2. Does NSN 2915-00-296-6286 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 2915-00-296-6286 contain precious materials?

   Precious metal content is unknown

4. Does NSN 2915-00-296-6286 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

5. When the NSN 2915-00-296-6286 was assigned to the Federal Catalog?

   It was assigned 65 years ago, on Sun, Jan 1, 1961