NSN TORQUE FLUID 56

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

-30.0 fahrenheit maximum pour point, 430.0 fahrenheit cleveland open cup minimum flash point and test method, 55.000 gallons quantity within each unit package, any acceptable basic ingredient, any acceptable service characteristics.

NSN 9150-01-177-9438 Datasheet

(NSN) National Stock Number

9150-01-177-9438

(FSG) Federal Supply Group

91 - Fuels, Lubricants, Oils, and Waxes

(FSC) Federal Supply Classification

9150 - Hydraulic, Lubricating and Oils and Greases: Cutting

(NIIN) National Item Identification Number

01-177-9438

Requires Demilitarization

Yes

(INC) Item Name Code

26896

Date

Sun, Apr 29, 1984

Basic Ingredient

any acceptable

Maximum Pour Point

-30.0 fahrenheit

Minimum Flash Point And Test Method

430.0 fahrenheit cleveland open cup

Quantity Within Each Unit Package

55.000 gallons

Service Characteristics

any acceptable

Supplementary Features

intended for use in transmission and other hydraulic applications in tractors and other construction equipment

Viscosity At Rated Temp

9.64 nominal 210 deg fahrenheit

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

Y - Indicates information is in the hazardous materials information resource system (hmirs).

Hazardous Characteristics Code

V6 - Petroleum products

Pseudo Item Name Code

0026896

Cross Reference

CAGE Codes

81230

Chevron U S a Inc

U.s./canadian manufacturers

30719

D-a Lubricant Co Inc Sub of Premier Industrial Corp

U.s./canadian manufacturers

0NVS1

Petro-Canada Refinery

Non-manufacturers

73219

Fiske Bros Refining Co

U.s./canadian manufacturers

3BLP9

D-a Lubricant Company, Inc.

U.s./canadian manufacturers

53933

Hydrotex Partners Ltd

U.s./canadian manufacturers

59595

Texaco Inc Corporate Hq

U.s./canadian manufacturers

0B176

Texas Lubricants Corp

Non-manufacturers

29700

Exxon Mobil Corporation Dba Exxonmobil Fuels Marketing Company Div Exxonmobil Fuels Marketing Company

U.s./canadian manufacturers

2J594

Delta Rocky Mountain Petroleum

Non-manufacturers

Freight Information

Air Commodity

FZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

R - 65.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

77320

Water Commodity

603 - Petroleum, lubricating or similar oils (other than bulk)

National Motor Freight Classification Item Number

155250

Questions & Answers

1. What is the FSCG of the NSN 9150-01-177-9438?

   The FSCG of the NSN 9150-01-177-9438 is 9150

2. Does NSN 9150-01-177-9438 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 9150-01-177-9438 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 9150-01-177-9438 contain hazardous materials?

   Indicates information is in the hazardous materials information resource system (hmirs).

5. When the NSN 9150-01-177-9438 was assigned to the Federal Catalog?

   It was assigned 42 years ago, on Sun, Apr 29, 1984