NSN TR415008

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

internal, rectangular external, rectangular cross-sectional shape style, flange inside diameter, flange inside width, unable to decode bend angle in deg, flange inside height.

NSN 5985-01-093-6020 Datasheet

(NSN) National Stock Number

5985-01-093-6020

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5985 - Related Equipment, Waveguides and Antennas

(NIIN) National Item Identification Number

01-093-6020

Requires Demilitarization

Yes

(INC) Item Name Code

00305

Date

Sat, Apr 19, 1980

Schedule B Code

8529109000

Bend Angle In Deg

unable to decode

Cross-Sectional Shape Style

internal, rectangular external, rectangular

Flange Inside Diameter

Flange Inside Height

Flange Inside Width

Flange Connecting Facility And Quantity

unable to decode

Flange Connecting Hole Diameter

Flange Depth

Flange Outside Height

Flange Outside Width

Flange Quantity

2

Flange Style

unable to decode

Flexibility

unable to decode

Fsc Application Data

antennas,waveguides,and related equipment

Insertion Loss In Decibels

0.80

Material

unable to decode

Nominal Thread Size

unable to decode

Style Designator

three bend type

Surface Treatment

Thread Class

unable to decode

Thread Direction

unable to decode

Thread Series Designator

unable to decode

Tubing Wall Construction Style

unable to decode

Voltage Standing Wave Ratio

1.30

Waveguide First Leg Length

1.500 inches nominal

Waveguide Fourth Leg Length

0.750 inches nominal

Waveguide Inside Height

0.139 inches minimum and 0.142 inches maximum

Waveguide Inside Width

0.279 inches minimum and 0.282 inches maximum

Waveguide Outside Height

0.218 inches minimum and 0.222 inches maximum

Waveguide Outside Width

0.358 inches minimum and 0.362 inches maximum

Waveguide Second Leg Length

1.510 inches minimum and 1.550 inches maximum

Waveguide Third Leg Length

1.485 inches minimum and 1.515 inches maximum

Identification

Demilitarization Code

D - Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000305

Cross Reference

CAGE Codes

34228

L3 Technologies, Inc. Div L3 Keo

U.s./canadian manufacturers

06351

Microwave Engineering Corporation

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49770

Water Commodity

723 - Radio parts and equipment, excluding tubes packed separately

National Motor Freight Classification Item Number

063520

Schedule B & Trade

Schedule B

8529-10-9000

Description

antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8524 to 8528, nesoi

End Use

21400 - Telecommunications equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76493

(NAICS) North American Industrial Classification System

334220

Questions & Answers

1. What is the FSCG of the NSN 5985-01-093-6020?

   The FSCG of the NSN 5985-01-093-6020 is 5985

2. Does the NSN 5985-01-093-6020 have a Schedule B code assigned?

   Yes, the Schedule B code is 8529109000

3. Does NSN 5985-01-093-6020 require demilitarization?

   Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

4. Does NSN 5985-01-093-6020 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5985-01-093-6020 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5985-01-093-6020 was assigned to the Federal Catalog?

   It was assigned 46 years ago, on Sat, Apr 19, 1980