NSN TYPE273D12V0LT

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

1 controlled circuit quantity, 12.0 volts nominal dc voltage rating, nonadjustable adjustability, not provided battery operation facility, 1 lamp quantity for which designed.

NSN 5945-00-435-7640 Datasheet

(NSN) National Stock Number

5945-00-435-7640

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5945 - Relays and Solenoids

(NIIN) National Item Identification Number

00-435-7640

Requires Demilitarization

Yes

(INC) Item Name Code

08410

Date

Fri, Mar 21, 1969

Schedule B Code

8536410005

Adjustability

nonadjustable

Battery Operation Facility

not provided

Controlled Circuit Quantity

1

Dc Voltage Rating

12.0 volts nominal

Lamp Quantity For Which Designed

1

Mounting Configuration

plug in mtd

Operating Mechanism Inclosure

not included

Overall Diameter

1.297 inches nominal

Overall Length

2.266 inches nominal

Terminal Quantity

3

Terminal Type

solder tab

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0008410

Cross Reference

CAGE Codes

98423

Willys Motors Inc Kaiser Electronics Div

U.s./canadian manufacturers

34623

Am General Llc

U.s./canadian manufacturers

94988

Cooper Industries Inc Champion Aviation Products

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-41-0005

Description

automotive signaling flashers, for a voltage not exceeding 60 volts

End Use

30230 - Other parts and accessories of vehicles

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77254

(NAICS) North American Industrial Classification System

336320

Questions & Answers

1. What is the FSCG of the NSN 5945-00-435-7640?

   The FSCG of the NSN 5945-00-435-7640 is 5945

2. Does the NSN 5945-00-435-7640 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536410005

3. Does NSN 5945-00-435-7640 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5945-00-435-7640 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5945-00-435-7640 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5945-00-435-7640 was assigned to the Federal Catalog?

   It was assigned 57 years ago, on Fri, Mar 21, 1969