NATO Stock Number
5990-00-010-1413
Sold in multiples of
1 EA
DEMIL
NO
Body Material
Steel, stainless
Body Style
Standard round c
Shoulder Diameter
Between 0.9995 inches and 1.0000 inches
Pilot Diameter
Between 0.6245 inches and 0.6250 inches
Overall Length
Between 1.9800 inches and 2.0100 inches
Flange Diameter
Between 1.0590 inches and 1.0620 inches
Flange Thickness
Between 0.0900 inches and 0.0960 inches
Undercut Diameter
0.9750 inches
Undercut Width
0.0500 inches
Shaft Diameter
0.0800 inches single shaft and 0.0810 inches single shaft
Shaft Length
0.3600 inches single shaft and 0.3900 inches single shaft
Shaft Undercut Width
0.0300 inches single shaft
Fragility Factor
Moderately rugged
Body Size
11
Rotor Input Voltage Rating In Volts
26.0
Frequency In Hertz
400.0
Rotor Input Current Rating
120.0 milliamperes
Rotor Input Electrical Power Rating
600.0 milliwatts
Zro Resistance In Ohms
44.00
Zso Resistance In Ohms
57.00
Rotor Dc Resistance In Ohms
18.00
Stator Dc Resistance In Ohms
9.30
Phase Shift Angle In Deg
4.000 input to output
Maximum Total Null Voltage Output In Millivolts Per Volt
25.00
Electrical Error Angular Range In Minutes
-15.0/+15.0
Actuator Friction Torque At Minus 55 Deg Celsius
1.8 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius
0.6 centimeter-grams
Torque Gradient Per Angular Deg
2000.0 millimeter-milligrams
Alignment Hole Quantity
4
Pilot Length
Between 0.0590 inches and 0.0650 inches
Shoulder Length
Between 0.0590 inches and 0.0650 inches
Mounting Surface To Terminal End Distance
1.6200 inches
Shaft Thread Series Designator
Unf single shaft
Shaft Thread Direction
Right-hand single shaft
Shaft Thread Class
3a single shaft
Terminal Location
Rear
Plus J Zro Reactance In Ohms
243.00
Plus J Zso Reactance In Ohms
28.00
Shaft Tapered End Minor Diameter
0.0780 inches single shaft
Shaft Type
Round, tapered, threaded, undercut single shaft
Alignment Hole Depth
0.0900 inches
Transformation Ratio
0.454 rotor to stator
Shaft Taper Angle In Deg
3.0 single shaft
Shaft Tip Length
0.0650 inches single shaft
Alignment Hole Bolt Circle Diameter
Between 0.8090 inches and 0.8150 inches
Shaft Taper Length
0.1370 inches single shaft
Shaft Thread Size
0.060 inches single shaft
Shaft Undercut Diameter
0.0440 inches single shaft and 0.0460 inches single shaft
Terminal Type And Quantity
5 wire lead
