NSN UPL-11

A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. Each component of the assemblage must be capable of functioning in accordance with its own item name. Consists of a single printed circuit board or terminal board upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. It may also include printed electronic components. The item is generally part of a subassembly and cannot be assigned a more definite item name. For items having a complete individual electrical/electronic function, use applicable item name such as amplifier (as modified); power supply; or the like. For items not having a complete individual electrical/electronic function, see applicable subassembly name, such as amplifier subassembly; power supply subassembly; or the like. For an assembly of electrical/electronic components mounted on other than a single printed wiring board, see electronic components assembly. Excludes:printed circuit board

2.530 inches nominal body length, 1.500 inches nominal body width, multipole-single actuator type body style, 1.810 inches nominal center to center distance between terminals parallel to length, 0.140 inches nominal boss height.

NSN 5925-01-464-4898 Datasheet

(NSN) National Stock Number

5925-01-464-4898

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

01-464-4898

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Mon, May 3, 1999

Schedule B Code

8536200040

Body Length

2.530 inches nominal

Body Style

multipole-single actuator type

Body Width

1.500 inches nominal

Boss Height

0.140 inches nominal

Center To Center Distance Between Terminals Parallel To Length

1.810 inches nominal

Center To Center Distance Between Terminals Parallel To Width

1.810 inches nominal

Circuit Protection Type

overcurrent all locations

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

0.750 inches nominal

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

2.062 inches nominal

Frequency In Hertz

60.0 all locations

Internal Trip Release Configuration

relay trip all locations

Main Contact Tripping Mechanism Type

nontrip free

Material

plastic case

Maximum Continuous Load Current Rating Per Pole

0.2 amperes ac all locations

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

1000.0 ac all locations

Mounting Facility Type And Quantity

4 threaded stud(s)

Mounting Surface To Terminal End Distance

0.280 inches nominal

Nominal Thread Size

0.303 inches and 0.313 inches

Operating Voltage Type And Rating Per Pole In Volts

240.0 ac all locations

Pole Quantity

2

Reset Method

manual

Terminal Type And Quantity

2 threaded stud

Thread Series Designator

unf

Trip Release Ambient Temp Rating

25.0 celsius nominal all locations

Trip Release Characteristic

time delay all locations

Trip Release Method

thermal all locations

Trip Delay Time In Seconds Per Rated Continuous Current

0.150 nominal at 125 pct all locations

Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

125.0 all locations

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

81541

Sensata Technologies Maryland, Inc

Non-manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-01-464-4898?

   The FSCG of the NSN 5925-01-464-4898 is 5925

2. Does the NSN 5925-01-464-4898 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-01-464-4898 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-01-464-4898 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5925-01-464-4898 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-01-464-4898 was assigned to the Federal Catalog?

   It was assigned 27 years ago, on Mon, May 3, 1999