NSN V161-391

A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. Each component of the assemblage must be capable of functioning in accordance with its own item name. Consists of a single printed circuit board or terminal board upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. It may also include printed electronic components. The item is generally part of a subassembly and cannot be assigned a more definite item name. For items having a complete individual electrical/electronic function, use applicable item name such as amplifier (as modified); power supply; or the like. For items not having a complete individual electrical/electronic function, see applicable subassembly name, such as amplifier subassembly; power supply subassembly; or the like. For an assembly of electrical/electronic components mounted on other than a single printed wiring board, see electronic components assembly. Excludes:printed circuit board

0.812 inches nominal body length, w/o mtg facilities, axial terminals body style, 0.010 microfarads single section capacitance value per section, 0.237 inches maximum body diameter, plastic case insulation material.

NSN 5910-01-072-8446 Datasheet

(NSN) National Stock Number

5910-01-072-8446

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-072-8446

Requires Demilitarization

Yes

(INC) Item Name Code

00006

Date

Mon, Mar 5, 1979

Schedule B Code

8532250080

Body Diameter

0.237 inches maximum

Body Length

0.812 inches nominal

Body Style

w/o mtg facilities, axial terminals

Capacitance Value Per Section

0.010 microfarads single section

Case Insulation Material

plastic

Dissipation Factor At Reference Temp In Percent

0.6000

Dielectric Material

plastic polyethylene terephthalate (pet)

Features Provided

hermetically sealed case

Internal Electrical Connection Type

extended foil

Insulation Resistance At Maximum Operating Temp

25000.0 megohms

Insulation Resistance At Reference Temp

100000.0 megohms

Nonderated Operating Temp

-65.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

200.0 dc single section

Reliability Failure Rate Level In Percent

0.1000

Reliability Indicator

established

Schematic Diagram Designator

no common or grounded electrode(s)

Specification/Standard Data

81349-mil-c-19978/13 government specification

Terminal Diameter

0.020 inches nominal

Terminal Length

1.625 inches minimum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Test Data Document

"81349-mil-c-19978 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-5.00 to 5.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000006

Cross Reference

CAGE Codes

01884

Exxelia Usa, Inc.

U.s./canadian manufacturers

56289

Sprague Electric Co World Hqs

U.s./canadian manufacturers

28527

L3harris Technologies, Inc.

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

00656

Aerovox Corp.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-25-0080

Description

fixed capacitors, dielectric of paper or plastic, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77866

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-072-8446?

   The FSCG of the NSN 5910-01-072-8446 is 5910

2. Does the NSN 5910-01-072-8446 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532250080

3. Does NSN 5910-01-072-8446 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-072-8446 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-072-8446 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-072-8446 was assigned to the Federal Catalog?

   It was assigned 47 years ago, on Mon, Mar 5, 1979