NSN VBE669L20K

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

clutch actuator travel control feature, 125.0 single section ambient temp in deg celsius per section at zero percent rated power, 70.0 single section ambient temp in deg celsius per section at full rated power, single shaft actuator type, 0.280 inches minimum and 0.374 inches maximum body height.

NSN 5905-00-784-2228 Datasheet

(NSN) National Stock Number

5905-00-784-2228

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5905 - Resistor

(NIIN) National Item Identification Number

00-784-2228

Requires Demilitarization

Yes

(INC) Item Name Code

37405

Date

Fri, Jan 1, 1960

Schedule B Code

8533400080

Actuator Travel Control Feature

clutch

Actuator Type

single shaft

Ambient Temp In Deg Celsius Per Section At Full Rated Power

70.0 single section

Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

125.0 single section

Body Height

0.280 inches minimum and 0.374 inches maximum

Body Length

1.250 inches nominal

Body Width

0.235 inches minimum and 0.300 inches maximum

Body Style

rectangular w/mounting holes/slots

Effective Electrical Rotation In Deg Angular Rotation

6120.0 minimum and 9720.0 maximum

Electrical Resistance Per Section

20.0 kilohms single section

Lateral Distance Between Mounting Hole Centers

0.995 inches minimum and 1.005 inches maximum

Mounting Facility Quantity

2

Mounting Hole Diameter

0.088 inches minimum and 0.098 inches maximum

Mounting Method

unthreaded hole(s)

Overall Height

0.446 inches nominal

Overall Length

1.308 inches nominal

Overall Width

0.235 inches minimum and 0.300 inches maximum

Power Dissipation Rating Per Section In Watts

0.3 free air single section

Reliability Indicator

not established

Resistance Tolerance Per Section In Percent

-10.0 to 10.0 single section

Rotary Actuator Travel In Angular Deg

6120.0 minimum and 9720.0 maximum

Section Quantity

1

Shaft Diameter

0.100 inches minimum and 0.140 inches maximum

Shaft Style

round, slotted

Shaft Length

0.058 inches nominal

Specification/Standard Data

81349-mil-r-22097/1 professional/industrial association specification

Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

-600.0 to 600.0 single section

Terminal Location

lower adjacent side single row

Terminal Type And Quantity

3 tab, solder lug

Test Data Document

"81349-mil-r-22097 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0037405

Cross Reference

CAGE Codes

H0203

Thales Nederland

Non-us manufacturer (nato), other foreign organization or codification bureaus

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35140

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

062960

Schedule B & Trade

Schedule B

8533-40-0080

Description

variable resistors, including potentiometers, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77235

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5905-00-784-2228?

   The FSCG of the NSN 5905-00-784-2228 is 5905

2. Does the NSN 5905-00-784-2228 have a Schedule B code assigned?

   Yes, the Schedule B code is 8533400080

3. Does NSN 5905-00-784-2228 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5905-00-784-2228 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5905-00-784-2228 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5905-00-784-2228 was assigned to the Federal Catalog?

   It was assigned 66 years ago, on Fri, Jan 1, 1960