NSN VCL0009-8D28

A transformer consisting of one or more primary winding(s) and one or more secondary winding(s). It may be designed for direct connection to an alternating current source for purposes of changing the secondary volts and amperes or designed to eliminate metallic interconnection between circuits in an overall one to one voltage ratio, with or without additional output windings, or items designed to automatically maintain a constant output voltage within specified limits under varying input or load conditions. Also includes items having a provision for mechanically changing the turns ratio or inductive coupling in progressive increments by means of voltage taps, ratio adjuster, or devices oe similar design. For transformers having winding(s) common to both input and output circuits, see transformer (1), power, autotransformer. Excludes:transformer (1), pulse.

2.475 inches minimum and 2.495 inches maximum fastener length, 0.4990 inches minimum and 0.4995 inches maximum grip diameter, distance from head largest bearing surface to shank hole center, 1.740 inches minimum grip length, 99.0 degrees minimum and 101.0 degrees maximum countersink angle.

NSN 5305-01-355-6952 Datasheet

(NSN) National Stock Number

5305-01-355-6952

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5305 - Screws

(NIIN) National Item Identification Number

01-355-6952

Requires Demilitarization

Yes

(INC) Item Name Code

29294

Date

Sat, Mar 21, 1992

Schedule B Code

7508900000

Countersink Angle

99.0 degrees minimum and 101.0 degrees maximum

Distance From Head Largest Bearing Surface To Shank Hole Center

Fastener Length

2.475 inches minimum and 2.495 inches maximum

Grip Diameter

0.4990 inches minimum and 0.4995 inches maximum

Grip Length

1.740 inches minimum

Head Diameter

0.951 inches minimum and 1.014 inches maximum

Head Style

flat countersunk

Internal Drive Style

torque-set ribbed

Material Document And Classification

unable to decode

Material

unable to decode

Minimum Tensile Strength

220000 pounds per square inch

Nominal Thread Diameter

0.500 inches

Shank Unthreaded Hole Diameter

Surface Finish

unable to decodeunable to decodeunable to decode

Surface Treatment Document And Classification

unable to decode

Surface Treatment

unable to decode

Thread Class

3a

Thread Direction

right-hand

Thread Length

0.735 inches nominal

Thread Quantity Per Inch

20

Thread Series Designator

unified national joint fine (unjf)

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0029294

Cross Reference

CAGE Codes

80539

Sps Technologies, Llc Dba Aerospace Fasteners Group Div Aerospace - Santa Ana

U.s./canadian manufacturers

26512

Northrop Grumman Systems Corporation Dba Northrop Grumman Is Div Mission Systems

U.s./canadian manufacturers

27624

Sps Technologies Llc Dba Pb Fasteners Div Pb Fasteners

U.s./canadian manufacturers

06710

Valley-Todeco, Inc. Dba Arconic Fastening Systems

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

70220

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

139820

Schedule B & Trade

Schedule B

7508-90-0000

Description

other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)

End Use

12300 - Finished metal shapes

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69975

(NAICS) North American Industrial Classification System

332999

Questions & Answers

1. What is the FSCG of the NSN 5305-01-355-6952?

   The FSCG of the NSN 5305-01-355-6952 is 5305

2. Does the NSN 5305-01-355-6952 have a Schedule B code assigned?

   Yes, the Schedule B code is 7508900000

3. Does NSN 5305-01-355-6952 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5305-01-355-6952 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5305-01-355-6952 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5305-01-355-6952 was assigned to the Federal Catalog?

   It was assigned 34 years ago, on Sat, Mar 21, 1992