NSN VE3433

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

0.776 inches nominal body length, actuation point adjustable, preset contact adjustability, 0.251 inches nominal body height, 0.375 inches nominal body width, increase contact action stimulus.

NSN 5930-00-812-1126 Datasheet

(NSN) National Stock Number

5930-00-812-1126

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-812-1126

Requires Demilitarization

Yes

(INC) Item Name Code

00451

Date

Mon, Jan 1, 1962

Schedule B Code

9032100000

Body Height

0.251 inches nominal

Body Length

0.776 inches nominal

Body Width

0.375 inches nominal

Contact Action Stimulus

increase

Contact Adjustability

actuation point adjustable, preset

Contact Adjustment Range

-20.00 to 20.00 actuation point degrees fahrenheit

Contact Adjustment Type

internal actuation point screw

Contact Load Current Rating

unable to decode

Contact Stimulus Rating

140.00 actuation point nominal degrees fahrenheit

Contact Voltage Rating In Volts

unable to decode

Distance Between Mounting Facility Centers

1.000 inches nominal

Features Provided

hermetically sealed case

Media For Which Designed

gas or liquid

Mounting Facility Pattern

two position in-line

Mounting Method

clip and slot

Mounting Slot Width

0.125 inches nominal

Nonpile-Up Contact Arrangement

1 pole, single throw, normally closed, momentary action

Operating Temp Rating

-40.0 fahrenheit minimum and 220.0 fahrenheit maximum

Overall Height

0.440 inches maximum

Overall Length

1.250 inches nominal

Overall Width

0.401 inches nominal

Style Designator

rectangular w/bracket

Temp Sensing Element Type

expanding shell

Terminal Type

tab, solder lug

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000451

Cross Reference

CAGE Codes

93929

Radiodetection, Llc

U.s./canadian manufacturers

18876

Us Army Aviation and Missile Command

Government departments or units, including military organizations

T6976

Pegasus Savunma Sanayi Ve Ticaret Anonim Sirketi

Non-us manufacturer (nato), other foreign organization or codification bureaus

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

9032-10-0000

Description

thermostats

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

87461

(NAICS) North American Industrial Classification System

334512

Questions & Answers

1. What is the FSCG of the NSN 5930-00-812-1126?

   The FSCG of the NSN 5930-00-812-1126 is 5930

2. Does the NSN 5930-00-812-1126 have a Schedule B code assigned?

   Yes, the Schedule B code is 9032100000

3. Does NSN 5930-00-812-1126 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-812-1126 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-812-1126 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-812-1126 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962