NSN W7363

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

unable to decode center to center distance between mounting facilities parallel to length, 3.620 inches maximum body length, unable to decode center to center distance between mounting facilities parallel to width, 2.250 inches maximum body height, 2.870 inches maximum body width.

NSN 5950-00-007-9207 Datasheet

(NSN) National Stock Number

5950-00-007-9207

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

00-007-9207

Requires Demilitarization

Yes

(INC) Item Name Code

32496

Date

Fri, Jul 14, 1972

Winding Operating Voltage

53 ac volts single component single secondary

Thread Series Designator

Unc single group

Reliability Indicator

Not established

Winding Operating Voltage

440 ac volts single component single primary

Center To Center Distance Between Mounting Facilities Parallel To Length

2.448 inches single mounting facility single center group

Center To Center Distance Between Mounting Facilities Parallel To Width

2 inches single mounting facility single center group

Overall Height

Up to 2.685 inches

Frequency Rating

60 hertz single component

Output Phase Relationship Input

Three phase to six phase single component

Body Height

Up to 2.25 inches

Body Width

Up to 2.87 inches

Body Length

Up to 3.62 inches

Inclosure Type

Hermetically sealed

Mounting Facility Quantity

4 single group

Mounting Method

Threaded stud single group

Winding Function and Quantity

1 primary single component and 1 secondary single component

Nominal Thread Size

0.138 inches single group

Thread Quantity Per Inch

32 single group

Winding Operating Current

Up to 82 milliamperes ac single component single secondary

Terminal Type and Quantity

10 solder stud

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0032496

Cross Reference

CAGE Codes

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

08715

Cen Electronics a Div of Chloride Power Electronics Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Questions & Answers

1. What is the FSCG of the NSN 5950-00-007-9207?

   The FSCG of the NSN 5950-00-007-9207 is 5950

2. Does NSN 5950-00-007-9207 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5950-00-007-9207 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5950-00-007-9207 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5950-00-007-9207 was assigned to the Federal Catalog?

   It was assigned 54 years ago, on Fri, Jul 14, 1972

6. What is the frequency rating of nsn 5950-00-007-9207?

   60 hertz single component

7. What is the frequency rating of nsn 5950-00-007-9207?

   60 hertz single component

8. What is the frequency rating of nsn 5950-00-007-9207?

   60 hertz single component