NSN WAYNE404

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

manually operated door access operation method, door,opening in front,1 door/opening location and quantity, ac or dc current type, direct fired oven design type, 60.0 hertz nominal frequency rating.

NSN 3424-00-989-2352 Datasheet

(NSN) National Stock Number

3424-00-989-2352

(FSG) Federal Supply Group

34 - Metalworking Machinery

(FSC) Federal Supply Classification

3424 - Metal Heat Treating and Non-Thermal Treating Equipment

(NIIN) National Item Identification Number

00-989-2352

Requires Demilitarization

Yes

(INC) Item Name Code

06243

Date

Mon, Jan 1, 1962

Schedule B Code

8514100000

Access Operation Method

manually operated door

Current Type

ac or dc

Design Type

direct fired oven

Door/Opening Location And Quantity

door,opening in front,1

Frequency Rating

60.0 hertz nominal

Furnished Items

counterweight

Inside Length

46.000 inches nominal

Inside Height

21.000 inches nominal

Inside Width

28.000 inches nominal

Phase

three

Maximum Operating Temp

2000.0 fahrenheit

Mounting Type

floor

Operating Temp Range

+1500.0 to 1800.0 fahrenheit

Temp Control Device Type

automatic

Voltage In Volts

220.0

Wattage Rating In Kilowatts

51.0

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Source of Supply Code

B14 - U.s. Army armament and chemical acquisition and logistics activity, attn: amsta-ac, rock island,il 61299-6000

Pseudo Item Name Code

0006243

Cross Reference

CAGE Codes

99998

Defense Supply Center Richmond Industrial Plant Equipment /dla/

U.s./canadian manufacturers

16076

Alhern-Martin Industrial Furnace Co

U.s./canadian manufacturers

Freight Information

Air Commodity

EZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Hazardous Materiel

FF -

Less than Carload Rating

W - Rating variable

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

42310

Water Commodity

72E - Engineer and material handling equipment, test/tool sets and equipment

National Motor Freight Classification Item Number

026290

Questions & Answers

1. What is the FSCG of the NSN 3424-00-989-2352?

   The FSCG of the NSN 3424-00-989-2352 is 3424

2. Does the NSN 3424-00-989-2352 have a Schedule B code assigned?

   Yes, the Schedule B code is 8514100000

3. Does NSN 3424-00-989-2352 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 3424-00-989-2352 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 3424-00-989-2352 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 3424-00-989-2352 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962