NSN WE-2207

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

unable to decode input-output phase relationship, 1.000 inches maximum body outside diameter, unable to decode frequency rating, 0.600 inches maximum body length, fully inclosed inclosure type.

NSN 5950-00-007-8741 Datasheet

(NSN) National Stock Number

5950-00-007-8741

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

00-007-8741

Requires Demilitarization

Yes

(INC) Item Name Code

32496

Date

Fri, Jul 14, 1972

Winding Operating Voltage

5.17 ac volts single component 3rd secondary

Winding Operating Voltage

7.92 ac volts single component 1st secondary

Winding Operating Current

Up to 300.0 milliamperes dc single component 1st secondary

Winding Operating Voltage

21.80 ac volts single component 2nd secondary

Winding Operating Current

Up to 20.0 milliamperes dc single component 2nd secondary

Winding Function and Quantity

1 primary single component and 3 secondary single component

Winding Operating Current

Up to 40.0 milliamperes dc single component 3rd secondary

Inclosure Type

Fully inclosed

Mounting Facility Quantity

1 single group

Mounting Method

Unthreaded hole single group

Body Outside Diameter

Up to 1.000 inches

Body Length

Up to 0.600 inches

Output Phase Relationship Input

Single phase to single phase single component

Winding Operating Voltage

9.00 ac volts single component single primary

Frequency Rating

10.0 kilohertz single component

Mounting Hole Diameter

0.166 inches single group

Overall Length

Up to 0.760 inches

Reliability Indicator

Not established

Terminal Type and Quantity

11 turret

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0032496

Cross Reference

CAGE Codes

11700

A.e.york, Llc

Non-manufacturers

13973

Litton Systems Inc. Div Navigation Systems Division

U.s./canadian manufacturers

95970

Mte Corp Milwaukee Transformer Co

U.s./canadian manufacturers

15634

Magnetika Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Questions & Answers

1. What is the FSCG of the NSN 5950-00-007-8741?

   The FSCG of the NSN 5950-00-007-8741 is 5950

2. Does NSN 5950-00-007-8741 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5950-00-007-8741 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5950-00-007-8741 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5950-00-007-8741 was assigned to the Federal Catalog?

   It was assigned 54 years ago, on Fri, Jul 14, 1972

6. What is the frequency rating of nsn 5950-00-007-8741?

   10.0 kilohertz single component

7. What is the frequency rating of nsn 5950-00-007-8741?

   10.0 kilohertz single component

8. What is the frequency rating of nsn 5950-00-007-8741?

   10.0 kilohertz single component