NSN WE1862

A tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. It is designed to maintain a predetermined distance between assembled parts. The item may be with or without flange(s) of any peripheral shape. The overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the body. (when the length, outside diameter, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). For items having other than a round or hexagon peripheral shape, see spacer, plate. Excludes:items with lubricating features, see bearing, sleeve and bushing, sleeve. See also bushing, tapered; spacer, ring; washer, flat; and washer, (as modified).

1.600 inches maximum body width, unable to decode center to center distance between mounting facilities parallel to length, unable to decode frequency rating, unable to decode center to center distance between mounting facilities parallel to width, 1.600 inches maximum body length.

NSN 5950-00-007-6007 Datasheet

(NSN) National Stock Number

5950-00-007-6007

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

00-007-6007

Requires Demilitarization

Yes

(INC) Item Name Code

32496

Date

Wed, Jul 12, 1972

Winding Operating Voltage

9.47 ac volts single component 3rd secondary

Winding Operating Voltage

9.47 ac volts single component 4th secondary

Special Features

2 primary windings; 6secondary windings

Winding Operating Voltage

98.98 ac volts single component 2nd primary

Winding Operating Voltage

98.98 ac volts single component 1st primary

Winding Operating Voltage

12.02 ac volts single component 2nd secondary

Winding Operating Voltage

12.02 ac volts single component 1st secondary

Winding Operating Current

Up to 3.9 amperes dc single component 2nd secondary

Winding Operating Current

Up to 3.9 amperes dc single component 1st secondary

Winding Operating Current

Up to 0.3 amperes dc single component 4th secondary

Winding Operating Current

Up to 0.3 amperes dc single component 3rd secondary

Thread Quantity Per Inch

40 single group

Nominal Thread Size

0.112 inches single group

Mounting Method

Threaded hole single group

Winding Function and Quantity

2 primary single component and 6 secondary single component

Mounting Facility Quantity

4 single group

Inclosure Type

Fully inclosed

Body Width

Up to 1.600 inches

Operating Temperature

Up to 110.0 degrees Celsius

Output Phase Relationship Input

Single phase to single phase single component

Body Length

Up to 1.600 inches

Frequency Rating

20.0 kilohertz single component

Overall Height

Up to 1.100 inches

Center To Center Distance Between Mounting Facilities Parallel To Width

1.300 inches single mounting facility single center group

Center To Center Distance Between Mounting Facilities Parallel To Length

1.300 inches single mounting facility single center group

Reliability Indicator

Not established

Thread Series Designator

Unc single group

Terminal Type and Quantity

16 turret

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0032496

Cross Reference

CAGE Codes

06481

Northrop Grumman Systems Corporation Div the Navigation, Targeting and Survivability Division

U.s./canadian manufacturers

13973

Litton Systems Inc. Div Navigation Systems Division

U.s./canadian manufacturers

26543

Wems Electronics Transformer Group

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Questions & Answers

1. What is the FSCG of the NSN 5950-00-007-6007?

   The FSCG of the NSN 5950-00-007-6007 is 5950

2. Does NSN 5950-00-007-6007 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5950-00-007-6007 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5950-00-007-6007 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5950-00-007-6007 was assigned to the Federal Catalog?

   It was assigned 54 years ago, on Wed, Jul 12, 1972

6. How long is nsn 5950-00-007-6007?

   Up to 1.600 inches

7. How long is nsn 5950-00-007-6007?

   Up to 1.600 inches

8. How long is nsn 5950-00-007-6007?

   Up to 1.600 inches