NSN WE2189

A transformer consisting of one or more primary winding(s) and one or more secondary winding(s). It may be designed for direct connection to an alternating current source for purposes of changing the secondary volts and amperes or designed to eliminate metallic interconnection between circuits in an overall one to one voltage ratio, with or without additional output windings, or items designed to automatically maintain a constant output voltage within specified limits under varying input or load conditions. Also includes items having a provision for mechanically changing the turns ratio or inductive coupling in progressive increments by means of voltage taps, ratio adjuster, or devices oe similar design. For transformers having winding(s) common to both input and output circuits, see transformer (1), power, autotransformer. Excludes:transformer (1), pulse.

1.630 inches maximum body height, unable to decode center to center distance between mounting facilities parallel to width, unable to decode center to center distance between mounting facilities parallel to length, frequency rating, 3.630 inches maximum body length.

NSN 5950-00-301-3734 Datasheet

(NSN) National Stock Number

5950-00-301-3734

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

00-301-3734

Requires Demilitarization

Yes

(INC) Item Name Code

32496

Date

Fri, Oct 12, 1973

Body Height

1.630 inches maximum

Body Length

3.630 inches maximum

Center To Center Distance Between Mounting Facilities Parallel To Width

unable to decode

Center To Center Distance Between Mounting Facilities Parallel To Length

unable to decode

Frequency Rating

Inclosure Type

fully inclosed

Input-Output Phase Relationship

Maximum Operating Temp

130.0 celsius

Mounting Facility Quantity

unable to decode

Mounting Hole Diameter

Mounting Method

Overall Width

2.750 inches maximum

Reliability Indicator

not established

Special Features

1primary,7 secondary windings; all currents are shown as rectified; secondaries 6 and 7 are rated the same,0.1 amp dc at 16.5 and 19.5 volts rms; 5th secondary is 0.57 amps at 21.50 and 24.50 volts rms

Terminal Type And Quantity

24 tab, solder lug

Transformer Winding Connection Type

delta-delta

Winding Function And Quantity

Winding Operating Current

unable to decode

Winding Operating Voltage

Winding Shielding Method

unable to decode

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0032496

Cross Reference

CAGE Codes

92755

Northrop Grumman Systems Corp Dba Northrop Grumman Systems Corp Div Land & Self Protection Systems Div

U.s./canadian manufacturers

11700

A.e.york, Llc

Non-manufacturers

15634

Magnetika Inc

U.s./canadian manufacturers

26543

Wems Electronics Transformer Group

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Questions & Answers

1. What is the FSCG of the NSN 5950-00-301-3734?

   The FSCG of the NSN 5950-00-301-3734 is 5950

2. Does NSN 5950-00-301-3734 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

3. Does NSN 5950-00-301-3734 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5950-00-301-3734 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5950-00-301-3734 was assigned to the Federal Catalog?

   It was assigned 52 years ago, on Fri, Oct 12, 1973