NSN X66131B

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

16.0 nominal impedance rating in ohms, male connector end design, self-cooled cooling method, +0.000 to 2.000 megahertz frequency range rating, dummy load,electrical,test,except specially designed fsc application data.

NSN 5985-00-280-3479 Datasheet

(NSN) National Stock Number

5985-00-280-3479

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5985 - Related Equipment, Waveguides and Antennas

(NIIN) National Item Identification Number

00-280-3479

Requires Demilitarization

Yes

(INC) Item Name Code

00335

Date

Tue, Jan 1, 1963

Schedule B Code

9030330080

Connector End Design

male

Cooling Method

self-cooled

Frequency Range Rating

+0.000 to 2.000 megahertz

Fsc Application Data

dummy load,electrical,test,except specially designed

Impedance Rating In Ohms

16.0 nominal

Power Rating

1.800 kilowatts peak

Termination Type

connection coaxial

Identification

Demilitarization Code

D - Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

B64 - U.s. Army aviation & missile command, attn: amsmi-lc-mm-c, redstone arsenal,al 35858-5230

Pseudo Item Name Code

0000335

Cross Reference

CAGE Codes

3B4M0

Lucent Technologies Inc Corporate Headquarters

Non-manufacturers

64959

American Telephone and Telegraph Co

U.s./canadian manufacturers

70408

At and T Corp

U.s./canadian manufacturers

80063

Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir

U.s./canadian manufacturers

80058

Joint Electronics Type Designation System

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

W - Rating variable

National Motor Freight Class Rating

W - Rating variable

Rail Variation

1

Special Handling

5 - Low sensitivity, category iv, aa&e, unclassified

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35120

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

062920

Schedule B & Trade

Schedule B

9030-33-0080

Description

instruments and apparatus for measuring or checking power, without a recording device, nesoi

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

87475

(NAICS) North American Industrial Classification System

334515

Questions & Answers

1. What is the FSCG of the NSN 5985-00-280-3479?

   The FSCG of the NSN 5985-00-280-3479 is 5985

2. Does the NSN 5985-00-280-3479 have a Schedule B code assigned?

   Yes, the Schedule B code is 9030330080

3. Does NSN 5985-00-280-3479 require demilitarization?

   Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

4. Does NSN 5985-00-280-3479 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5985-00-280-3479 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5985-00-280-3479 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963