NSN X7726410

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

gage,outside roller;consists of face plate,12.000 in.lg,18.500 in. h,0.250 in.thk;steel;one nut;base plate one,0.250 in. thk,12.000 in.lg,14.000 in.h;2 ea gusset;1 spacer;1 disk;1 stud;2 ea guide block;round magnetic rod;4 ea 10-24unc-2a flat hd scr by 0.500 in.lg,stl;2 ea am std soc hd cap scr 0.375 in.-16unc-2a-1.500 in. lg.w/hex nut,stl;2 ea am std soc hd cap scr 0.250 in.-20 unc-2ax 1.000 in. lg stl;4 ea am std soc hd cap scr 0.250-20 unc-2ax0.750 in. lg stl;4 flat washers 0.250 in. stl;3 ea am std hex soc scr 4-4bunf-2ax0.4375 in. lg stl;1 gage,m/n c81s,lgrange w/revolution counter,balance dial-plus on right-w/adj. mounting bracket at-28,w/matching dovetail back bk-93,w/regular contact point,w/a 1.3 ounce steel weight-0.750 in. dia. in place of the pull back spring special features.

NSN 5220-01-047-5662 Datasheet

(NSN) National Stock Number

5220-01-047-5662

(FSG) Federal Supply Group

52 - Measuring Tools

(FSC) Federal Supply Classification

5220 - Inspection Gages and Precision Layout Tools

(NIIN) National Item Identification Number

01-047-5662

Requires Demilitarization

Yes

(INC) Item Name Code

38474

Date

Sat, Sep 10, 1977

Schedule B Code

8608000000

Special Features

gage,outside roller;consists of face plate,12.000 in.lg,18.500 in. h,0.250 in.thk;steel;one nut;base plate one,0.250 in. thk,12.000 in.lg,14.000 in.h;2 ea gusset;1 spacer;1 disk;1 stud;2 ea guide block;round magnetic rod;4 ea 10-24unc-2a flat hd scr by 0.500 in.lg,stl;2 ea am std soc hd cap scr 0.375 in.-16unc-2a-1.500 in. lg.w/hex nut,stl;2 ea am std soc hd cap scr 0.250 in.-20 unc-2ax 1.000 in. lg stl;4 ea am std soc hd cap scr 0.250-20 unc-2ax0.750 in. lg stl;4 flat washers 0.250 in. stl;3 ea am std hex soc scr 4-4bunf-2ax0.4375 in. lg stl;1 gage,m/n c81s,lgrange w/revolution counter,balance dial-plus on right-w/adj. mounting bracket at-28,w/matching dovetail back bk-93,w/regular contact point,w/a 1.3 ounce steel weight-0.750 in. dia. in place of the pull back spring

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Source of Supply Code

FLZ - Warner-robins air logistics center 455 byron st robins afb, ga 31098-1860

Pseudo Item Name Code

0038474

Cross Reference

CAGE Codes

98748

Air Force United States Department of the Dba Tinker Afb Oc Alc Dsp Div Department of the Air Force

Government departments or units, including military organizations

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

F - 150.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

33170

Water Commodity

732 - Tools, hand and portable, electric

National Motor Freight Classification Item Number

058240

Schedule B & Trade

Schedule B

8608-00-0000

Description

railway track fixtures; mechanical signaling, safety or traffic control equip for railways, roads, inland waterways, airfield, ports; and parts

End Use

22100 - Railway transportation equipment

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

79191

(NAICS) North American Industrial Classification System

334290

Questions & Answers

1. What is the FSCG of the NSN 5220-01-047-5662?

   The FSCG of the NSN 5220-01-047-5662 is 5220

2. Does the NSN 5220-01-047-5662 have a Schedule B code assigned?

   Yes, the Schedule B code is 8608000000

3. Does NSN 5220-01-047-5662 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5220-01-047-5662 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5220-01-047-5662 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5220-01-047-5662 was assigned to the Federal Catalog?

   It was assigned 49 years ago, on Sat, Sep 10, 1977