NSN XTL5

An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use post, electrical-mechanical equipment. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use nut (1), plain (as modified). Excludes:nut (1), plain, cap. See also turnbuckle body.

solid anode type, w/o mtg facilities, axial terminals body style, 0.875 inches nominal body diameter, 1.906 inches nominal body length, tantalum capacitive electrode material.

NSN 5910-00-667-6506 Datasheet

(NSN) National Stock Number

5910-00-667-6506

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-667-6506

Requires Demilitarization

Yes

(INC) Item Name Code

00008

Date

Tue, Jan 1, 1963

Schedule B Code

8532290040

Anode Type

solid

Body Diameter

0.875 inches nominal

Body Length

1.906 inches nominal

Body Style

w/o mtg facilities, axial terminals

Capacitive Electrode Material

tantalum

Capacitance Value Per Section

5.000 microfarads single section

Dc Leakage At Reference Temp

125.000 microamperes

Electrical Polarization

polarized

Equivalent Series Resistance At Reference Temp In Ohms

12.50

Features Provided

hermetically sealed case

Nonderated Operating Temp

-55.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

450.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

electrode(s) grounded to case

Terminal Length

0.312 inches nominal

Terminal Type And Quantity

1 solder stud

Tolerance Range Per Section

-10.00 to 100.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000008

Cross Reference

CAGE Codes

037Z3

Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (drawings)

Government departments or units, including military organizations

88818

Kearfott Corporation Div Guidance and Navigation Division

U.s./canadian manufacturers

56289

Sprague Electric Co World Hqs

U.s./canadian manufacturers

1RUZ5

Palm Beach Components Inc.

Non-manufacturers

90201

Mallory Sonalert Products, Inc.

U.s./canadian manufacturers

06124

Mallory Timers Co Div of Emhart Industries Inc

U.s./canadian manufacturers

37942

Yosemite Investment Inc Dba North American Capacitor Co

U.s./canadian manufacturers

05079

Vishay Sprague, Inc. Dba Vishay Sprague Inc

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-667-6506?

   The FSCG of the NSN 5910-00-667-6506 is 5910

2. Does the NSN 5910-00-667-6506 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-00-667-6506 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-667-6506 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-667-6506 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-667-6506 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963