NSN YJ41003TC

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

automated radar terminal system 3a (arts3a) end item identification, ferrite magnetic material,coatedwith a vacuum-deposited material,paralyne; moisture resistance to organic solvents and acid bases; overall dia 0.375 in.; id 0.187 in.; 0.125 in. hgt general characteristics item description.

NSN 5950-01-088-2987 Datasheet

(NSN) National Stock Number

5950-01-088-2987

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

01-088-2987

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Thu, Jan 10, 1980

End Item Identification

automated radar terminal system 3a (arts3a)

General Characteristics Item Description

ferrite magnetic material,coatedwith a vacuum-deposited material,paralyne; moisture resistance to organic solvents and acid bases; overall dia 0.375 in.; id 0.187 in.; 0.125 in. hgt

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

G69 - Department of transportation federal aviation administration attn: coe aml-030 tsf bldg 215 po box 25082 oklahoma city, ok 73125-0082

Pseudo Item Name Code

1153587

Cross Reference

CAGE Codes

21340

Itt Telecom Products Corp Network Systems Div

U.s./canadian manufacturers

08510

Spang Power Control

U.s./canadian manufacturers

Freight Information

Questions & Answers

1. What is the FSCG of the NSN 5950-01-088-2987?

   The FSCG of the NSN 5950-01-088-2987 is 5950

2. Does NSN 5950-01-088-2987 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5950-01-088-2987 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5950-01-088-2987 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5950-01-088-2987 was assigned to the Federal Catalog?

   It was assigned 46 years ago, on Thu, Jan 10, 1980