NSN YMD-6798

An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. Excludes:bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.

pedestal crane end item identification, 125.0 lowest ac voltage rating at sea level contact voltage rating in volts, 15.0 amperes resistive load ac at sea level contact load current rating, 0.500 inches nominal single actuator shaft diameter, 460.0 highest ac voltage rating at sea level contact voltage rating in volts.

NSN 5930-01-450-2482 Datasheet

(NSN) National Stock Number

5930-01-450-2482

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-450-2482

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Fri, Oct 31, 1997

Schedule B Code

8536509025

End Item Identification

pedestal crane

Contact Load Current Rating

15.0 amperes resistive load ac at sea level

Contact Voltage Rating In Volts

125.0 lowest ac voltage rating at sea level

Contact Voltage Rating In Volts

460.0 highest ac voltage rating at sea level

Shaft Diameter

0.500 inches nominal single actuator

Switch Actuator Indexing Position Quantity

2 single actuator

Switch Actuator Stop Device Type

adjustable stop single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Special Features

standard two cam s.p.d.t. rotary limit switch; bronze worm gear 150 to 1 ratio; independently adjustable cams; nema type 7 enclosure

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

0NXK4

Kurrin and Richards Inc

Non-manufacturers

16016

Patriot Sensors & Controls Corp Div Measurement & Calibration Technologies

U.s./canadian manufacturers

70433

Appleton Marine Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9025

Description

switches, rotary, rated at over 5 a, for a voltage not exceeding 1,000 volts

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-450-2482?

   The FSCG of the NSN 5930-01-450-2482 is 5930

2. Does the NSN 5930-01-450-2482 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509025

3. Does NSN 5930-01-450-2482 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-450-2482 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5930-01-450-2482 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-450-2482 was assigned to the Federal Catalog?

   It was assigned 28 years ago, on Fri, Oct 31, 1997