Updated NSNs

cross section outside diameter 0.002 round conductor size 43 awg single conductor

steel material nominal thread diameter 0.25

nickel alloy countersink angle: 98.5 degrees to 101.5 degrees

length: 60 inches consists of 17 conductors of no. 20 awg 3 connectors

height 1.5 aluminum material

board overall length 13.125 board overall width 2

length 0.312 cable entrance diameter 0.049

weight per unit measure 0.204 pounds per linear foot aluminum material

thickness 0.4 width across flats 1.75

407l tactical air control system 485l tacsi

mating end quantity 1

b-52 se css dck-167/a3 leak test fixture

outside diameter 9.5 gasket center to flat distance 3.5

thread length 0.406 first end taper angle 45 degrees

when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension the dimension will be used to determine compliance.

aluminum material left inside angle 90 degrees

aluminum material left inside angle 90 degrees

length: 10 feet to 12 feet weight per unit measure: 0.39 pounds per linear foot

aluminum material left side flange thickness 0.188

temperature coefficient of resistance in ppm per degrees celsius -5/+5 body length 0.375

diameter 1.687 graduation unit 0.0005 measurement capacity 0.1

body length: up to 0.87 inches body width: up to 0.87 inches

voltage rating: up to 500 ac rated working voltage all conductors

temperature coefficient of resistance in ppm per degrees celsius -5/+5 power dissipation rating in watts 0.1 free air

material thickness 0.02 width 0.375

iron inside diameter: 4.5 inches overall length: 3.639 inches overall diameter: 6 inches

length: 97.37 inches width: 9.75 inches

steel overall length: 3.188 inches overall width: 0.716 inches overall height: 0.36 inches

steel material material hardness rating 47 rockwell c minimum and 52 rockwell c maximum

aluminum alloy height: 1.82 inches to 1.95 inches