Worldwide distributor of NSN parts and consumables located in the USA.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Paints and varnishe (incl enamels & lacquers) based on synthetic polymers, etc in a nonaqueous medium, nesoi
Paints and varnishes (including enamels and lacquers) based on synthetic or chemically modified natural polymers, nonaqueous; plastics in solution
Chemicals-other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
149980 - Paint and related materials
620 - Paint, in individual containers less than 10 cubic ft
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
R - Flammable liquids, un class 3 (flammable liquids label)
T - 55.0
W - Rating variable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
No pre-dated pricing for this NSN could be found. | |
Does NSN 8010-01-164-4609 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Italy | |
What is the NIIN of NSN 8010-01-164-4609? | |
011644609 or 01-164-4609 | |
Does NSN 8010-01-164-4609 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 8010-01-164-4609? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Oct 17, 1983 |
Ld50 lc50 mixture: n/k
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: dermatitis.Removal of cured matl by
grinding may result in suspending silica & nuisance dust in
air.Prod contains an aluminosilicate which if heated can transform
to mullite & cristobalite (a form of crystalline silica).Rptd
inhal of respirable free crystalline silica dust may cause delayed
lung injury (silicosis).
explanation of carcinogenicity: none
effects of overexposure: eyes: burning.Severe irritant (rated 105 in
0-110 range,rabbit).Skin: moderate irritant.Dermatitis.Ingestion: n/k
.Inhalation: overexposure could cause irritation of respiratory
tract.Repeated inhalation of respirable free crystalline silica
dust may cause delayed lung injury (silicosis).
medical cond aggravated by exposure: asthma,sensitization dermatitis.
First aid: wear recommended protective equipment.Eyes: flush with water
for 15 min seek medical attn.Skin: wash thoroughly after
handling.Ingestion/inhalation: n/k .
Decomp temp: decomp text: n/k
spec gravity: 1.136 (water=1)
solubility in water: moderate
appearance and odor: ammoniacal,mercaptan
Stability indicator/materials to avoid: yes
strong oxidizing agents,strong acids,chlorinated organic compounds.
stability condition to avoid: n/k
hazardous decomposition products: heating to decomposition may produce
quantities of free silica (cristobalite).
conditions to avoid polymerization: reacts with considerable heat with
hot resins.
Waste disposal methods: disposal must be in accordance with
federal,state,and local regulations.Coordination with supporting
installation and/or macom environmental coordination prior to
disposal is recommended to determine appropriate disposal methods
.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: amorphous silica.Acgih tlv is from notice of intended
change list,1990.
cas: 112945-52-5
rtecs #: vv7310000
other rec limits: n/k
osha pel: 6 mg/m3
acgih tlv: 0.2 mg/m3 resp dust
ingred name: aluminosilicate fiber
other rec limits: n/k
osha pel: n/k
acgih tlv: n/k
ingred name: amidoamine resin
other rec limits: n/k
osha pel: n/k
acgih tlv: n/k
ingred name: polyamide resin/triethylenetetramine
other rec limits: n/k
osha pel: n/k
acgih tlv: n/k
Ld50 lc50 mixture: n/k
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: removal of cured matl by grinding may
result in suspending silica & nuisance dust in air.Prod contains an
aluminosilicate which if heated can transform to mullite &
cristobalite (a form of crystalline silica).Repeated inhalation of
respirable free crystalline silica dust may cause delayed lung
injury (silicosis).
explanation of carcinogenicity: none
effects of overexposure: eyes: irritating.Skin: primary irritation on
prolonged contact.Ingestion: n/k .Inhalation: repeated inhalation of
respirable free crystalline silica dust may cause delayed lung
injury (silicosi s).Inhalation of epoxy may be irritating but resin
is not volatile & generally presents no serious hazard.
medical cond aggravated by exposure: allergies and/or other respiratory
conditions.
First aid: eyes: flush thoroughly with water for 15 min.Skin: wash with
soap and water.Ingestion: induce vomiting and call physician
immediately.Inhalation: remove to fresh air.Get medical help.
Boiling pt: b.P. Text: 600f,315.5c
decomp temp: decomp text: n/k
vapor pres: see supp
vapor density: 9 (air=1)
spec gravity: 1.706 (water=1)
solubility in water: negligible
appearance and odor: viscous liquid with mild aromatic odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents,strong acids,chlorinated organic compounds.
stability condition to avoid: n/k
hazardous decomposition products: heating to decomposition may produce
quantities of free silica
(cristobalite).Co*2,aldehydes,acids,no*2,so*2.
conditions to avoid polymerization: reacts with considerable heat with
aliphatic amines.
Waste disposal methods: disposal must be in accordance with
federal,state,and local regulations.Coordination with supporting
installation and/or macom environmental coordination prior to
disposal is recommended to determine appropriate disposal methods
.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: amorphous silica.Acgih tlv is from notice of intended
change list,1990.
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt: 2.0%
other rec limits: n/k
osha pel: 6 mg/m3
acgih tlv: 0.2 mg/m3 resp dust
ingred name: aluminosilicate fiber
other rec limits: n/k
osha pel: n/k
acgih tlv: n/k
ingred name: epoxy resin (diglycidyl ether of bisphenol a)
cas: 1675-54-3
rtecs #: tx3800000
fraction by wt: 48.0%
other rec limits: n/k
osha pel: n/k
acgih tlv: n/k