NSN 048639BASIC

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

straight shape w/jackscrew body style, thermal shock resistant and vibration resistant and humidity resistant and salt water resistant environmental protection, jackscrew connector locking method, 1.290 inches minimum and 1.310 inches maximum distance between mounting facility centers, unable to decode contact position arrangement style.

NSN 5935-00-196-6764 Datasheet

(NSN) National Stock Number

5935-00-196-6764

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-196-6764

Requires Demilitarization

Yes

(INC) Item Name Code

61925

Date

Wed, Jun 17, 1970

Schedule B Code

8538907080

Body Style

straight shape w/jackscrew

Connector Locking Method

jackscrew

Contact Position Arrangement Style

unable to decode

Distance Between Mounting Facility Centers

1.290 inches minimum and 1.310 inches maximum

Environmental Protection

thermal shock resistant and vibration resistant and humidity resistant and salt water resistant

Insert Material Document And Classification

Insert Material

Mating End Quantity

12

Nominal Thread Size

0.138 inches

Operating Temp Rating

-54.0 celsius minimum and 125.0 celsius maximum

Overall Length

1.665 inches minimum and 2.480 inches maximum

Overall Width

0.560 inches minimum and 0.580 inches maximum

Polarization Method

polarization boss and guide pin/socket

Thread Class

2a and 3b

Thread Direction

right-hand

Thread Quantity Per Inch

32 and 40

Thread Series Designator

unified national coarse (unc)

Threaded Device Type

coupling facility and back shell

Unthreaded Mounting Hole Diameter

0.149 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0061925

Cross Reference

CAGE Codes

22915

Northrop Grumman Corp Electronic Systems Defensive System Div

U.s./canadian manufacturers

53669

Aptiv Services 3 (us), Llc

U.s./canadian manufacturers

73293

Stellant Systems Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-00-196-6764?

   The FSCG of the NSN 5935-00-196-6764 is 5935

2. Does the NSN 5935-00-196-6764 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-00-196-6764 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-196-6764 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5935-00-196-6764 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-196-6764 was assigned to the Federal Catalog?

   It was assigned 56 years ago, on Wed, Jun 17, 1970