NSN 0993A

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

bayonet pin and externally threaded shell connector locking method, straight shape body style, unable to decode contact material document and classification, unable to decode contact material, round bushing accommodation hole shape.

NSN 5935-00-787-2128 Datasheet

(NSN) National Stock Number

5935-00-787-2128

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-787-2128

Requires Demilitarization

Yes

(INC) Item Name Code

15091

Date

Fri, Jan 1, 1960

Schedule B Code

8548900100

Body Style

straight shape

Bushing Accommodation Hole Shape

round

Connector Locking Method

bayonet pin and externally threaded shell

Contact Material Document And Classification

unable to decode

Contact Material

unable to decode

Contact Position Arrangement Style

unable to decode

Contact Removability

unable to decode

Contact Maximum Ac Voltage Rating In Volts

unable to decode

Contact Surface Treatment Document And Classification

unable to decode

Contact Surface Treatment

unable to decode

Distance From Mounting Shoulder To Front Face

0.719 inches nominal

Environmental Protection

corrosion resistant and pressure proof and salt water resistant

Included Contact Quantity

unable to decode

Included Contact Type

unable to decode

Insert Material

unable to decode

Mating End Quantity

2

Mounting Facility Thickness

0.125 inches nominal

Nominal Thread Size

0.190 inches and 0.500 inches

Overall Diameter

0.755 inches maximum

Overall Length

1.172 inches minimum and 1.240 inches maximum

Precious Material And Location

contact and shell surfaces silver

Precious Material And Weight

0.110 silver grains, troy

Precious Material

silver

Radio Frequency Type Contact Characteristic Impedance In Ohms

unable to decode

Shell Material Document And Classification

qq-b-613 fed spec single material response

Shell Material

copper alloy

Shell Surface Treatment Document And Classification

qq-s-365 fed spec single treatment response

Shell Surface Treatment

silver

Shell Type

solid

Thread Class

2a

Thread Direction

right-hand

Thread Quantity Per Inch

32 and 28

Thread Series Designator

unf and unef

Threaded Device Type

coupling facility and mounting bushing

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015091

Cross Reference

CAGE Codes

94375

Lax Electronics, Inc. Dba Automatic Connector Div Automatic Connector

U.s./canadian manufacturers

13499

Rockwell Collins, Inc. Dba Collins Aerospace Government Systems Div Collins Aerospace - Government Systems

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Questions & Answers

1. What is the FSCG of the NSN 5935-00-787-2128?

   The FSCG of the NSN 5935-00-787-2128 is 5935

2. Does the NSN 5935-00-787-2128 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5935-00-787-2128 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-787-2128 contain precious materials?

   Item contains silver.

5. Does NSN 5935-00-787-2128 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-787-2128 was assigned to the Federal Catalog?

   It was assigned 66 years ago, on Fri, Jan 1, 1960