NSN 0N230239

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

aluminum alloy material, 1 threaded coupling mounting facility type and quantity, 0.125 inches minimum and 0.250 inches maximum cable opening diameter, 0.938 inches nominal thread size, 1 cable opening quantity.

NSN 5935-01-104-9288 Datasheet

(NSN) National Stock Number

5935-01-104-9288

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-104-9288

Requires Demilitarization

Yes

(INC) Item Name Code

67169

Date

Sat, Dec 13, 1980

Schedule B Code

8548900100

Cable Opening Quantity

1

Cable Opening Diameter

0.125 inches minimum and 0.250 inches maximum

Material

aluminum alloy

Mounting Facility Type And Quantity

1 threaded coupling

Nominal Thread Size

0.938 inches

Overall Height

1.062 inches nominal

Overall Length

3.125 inches nominal

Overall Width

0.937 inches nominal

Style Designator

straight type w/cable clamp

Surface Treatment

cadmium

Thread Class

2b

Thread Direction

right-hand

Thread Quantity Per Inch

20

Thread Series Designator

unef

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0067169

Cross Reference

CAGE Codes

98230

National Security Agency

U.s./canadian manufacturers

06324

Glenair, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Questions & Answers

1. What is the FSCG of the NSN 5935-01-104-9288?

   The FSCG of the NSN 5935-01-104-9288 is 5935

2. Does the NSN 5935-01-104-9288 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5935-01-104-9288 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-104-9288 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5935-01-104-9288 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-104-9288 was assigned to the Federal Catalog?

   It was assigned 45 years ago, on Sat, Dec 13, 1980