NSN 10047-1069

A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, and the like, shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. For items with step by step variation, see rheostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes:resistor (1), variable, wire wound, nonprecision; resistor (1), variable, nonwire wound precision; and resistor (1), variable, wire wound, precision.

unable to decode contact position arrangement style, straight shape, external coupling body style, unable to decode contact removability, 1.156 inches nominal center to center distance between mounting facilities parallel to height, externally threaded shell connector locking method.

NSN 5935-00-755-2787 Datasheet

(NSN) National Stock Number

5935-00-755-2787

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-755-2787

Requires Demilitarization

Yes

(INC) Item Name Code

15093

Date

Mon, Jan 1, 1962

Schedule B Code

8538907080

Body Style

straight shape, external coupling

Center To Center Distance Between Mounting Facilities Parallel To Height

1.156 inches nominal

Connector Locking Method

externally threaded shell

Contact Position Arrangement Style

unable to decode

Contact Removability

unable to decode

Contact Maximum Ac Voltage Rating In Volts

unable to decode

Contact Maximum Current Rating In Amps

unable to decode

Contact Maximum Dc Voltage Rating In Volts

unable to decode

Contact Surface Treatment

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

1.156 inches nominal

Distance From Mounting Shoulder To Front Face

0.750 inches minimum and 0.781 inches maximum

Environmental Protection

moisture resistant and salt water resistant and vibration resistant

Included Contact Quantity

unable to decode

Included Contact Type

unable to decode

Insert Position In Deg

0.0

Mating End Quantity

1

Nominal Thread Length

0.625 inches

Nominal Thread Size

1.250 inches

Overall Height

1.500 inches nominal

Overall Length

1.938 inches maximum

Overall Width

1.500 inches nominal

Polarization Method

keyway or multiple keyway

Precious Material And Location

contact surfaces gold and contact surfaces silver

Precious Material

gold and silver

Precious Material And Weight

0.017 gold grains, troy and 0.017 silver grains, troy

Shell Surface Treatment Document And Classification

qq-p-416,ty 2,cl 3 fed spec single treatment response

Shell Material

aluminum alloy

Shell Surface Treatment

cadmium

Shell Type

solid

Specification/Standard Data

81349-mil-c-5015 government specification

Terminal Location

unable to decode

Terminal Type

unable to decode

Test Data Document

"81349-mil-c-5015 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

2a

Thread Direction

right-hand

Thread Series Designator

unef

Threaded Device Type

coupling facility

Unthreaded Mounting Hole Diameter

0.115 inches minimum and 0.130 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015093

Cross Reference

CAGE Codes

18192

Cooper Crouse-Hinds Llc

U.s./canadian manufacturers

07482

General Electric Company

U.s./canadian manufacturers

53711

Naval Sea Systems Command

U.s./canadian manufacturers

07421

L3harris Interstate Electronics Corporation

U.s./canadian manufacturers

12763

Dynalec Corporation

U.s./canadian manufacturers

80064

Naval Ship Systems Command

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-00-755-2787?

   The FSCG of the NSN 5935-00-755-2787 is 5935

2. Does the NSN 5935-00-755-2787 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-00-755-2787 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-755-2787 contain precious materials?

   Item contains gold.

5. Does NSN 5935-00-755-2787 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-755-2787 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962